MSA Magnetic Safety Switch, 316 Stainless Steel, 24 V dc

  • RS Stock No. 826-4384
  • Mfr. Part No. 130001
  • Manufacturer IDEM
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

IDEM MSA Standalone Coded Non Contact Switches

The MSA Non-contact Coded Switches have been developed as standalone mountable devices to provide a high level of fault detection and functional safety.
These non-contact switches can be mounted to guard doors to provide and maintain a high level of functional safety without the need to connect to a safety relay or safety controller. They have their own internal monitoring system and use force guided mechanical contacts which maintain PLe/Category 4 (ISO13849-1) even when the switches are connected in series.
Made from stainless steel 316 with a mirror polished (Ra4) surface finish these safety switches are suitable for CIP and SIP process applications and have IP69K ingress protection.
The typical sensing distance of the switch when it is "on" is 12mm, with wide tolerance to guard misalignment after setting.

Standalone device with interlocking control without the need for additional controllers
Feedback circuit check option is included for use when incorporating reset buttons and external contactor feedback checks
Maintains PLe Cat.4 by internally checking the internal mechanical relays at each safety demand
Connect up to 20 switches in series
Ability to connect other switches and E Stops in series
Two diagnostic LED’s to indicate: Guard closed, Actuator present/removed, Feedback Circuit checked
Output contacts will switch up to 230Vac 3A
The housings are compact and easy to fit on frame sections of less than 40mm
Stainless steel 316 housing (mirror polished finish to Ra4)
IP69K ingress protection

Standards

High Functional Safety to ISO13849-1 - up to PLe/Cat 4. Conformance to EN60947-5-3 PDF-M.

Specifications
Attribute Value
Supply Voltage 24 V dc
Safety Contacts 2NC
Housing Material 316 Stainless Steel
Auxiliary Contacts NC
Connection Type 2m cable
Switch Type Rectangular
Terminal Type Pre-Wired
Series MSA
Switching Distance 10 (Close) mm, 15 (Open) mm
IP Rating IP67, IP69K
Supply Current 100 mA
Actuator Included Yes
Width 27 (Actuator) mm, 38 (Switch) mm
Depth 21 (Actuator) mm, 27 (Switch) mm
Actuator Type Master Coded
Number of Approach Directions 2
Sensor Principle Magnetic
Length 95 (Actuator) mm, 95 (Switch) mm
Safety Category 4
Dimensions 95 x 27 x 21 (Actuator) mm, 95 x 38 x 27 (Switch) mm
5 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 369.80
(exc. GST)
$ 425.27
(inc. GST)
units
Per unit
1 +
$369.80
Related Products
With no need for a separate safety relay ...
Description:
With no need for a separate safety relay this device saves space in the cabinet with no loss of functionality and is easy to install. provides Cat 3//4 or SIL 2//3 protection on moveable machine guards or where frequent washdown ...
XCS-DM coded magnetic safety switches are designed for ...
Description:
XCS-DM coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect ...
Substitutes door handle and safety switch in one ...
Description:
Substitutes door handle and safety switch in one IP67 rated unit, no further door fittings required. Ideal for small and light movable guards (rotating doors max. 5kg, sliding doors max. 3kg) Tamper-proof due to integral coded safety sensor. Control category ...
The PSEN cs1.1p safety switch (stock no. 918-6689) ...
Description:
The PSEN cs1.1p safety switch (stock no. 918-6689) is coded and switches with an actuator from the PSEN cs1.1 series. There is no restriction on the number of times the actuator can be used and reset.The PSEN cs2.13p safety switch ...