Tektronix P2220 Oscilloscope Probe, Probe Type: Passive 200MHz

  • RS Stock No. 481-0823
  • Mfr. Part No. P2220
  • Manufacturer Tektronix
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

TPS2000 Accessories

Accessories available for Tektronix TPS2000 Series digital storage oscilloscopes include: passive probes P2220 ( 481-0823 ) & P5122 ( 712-1141 ); current probes A621 ( 851-218 ) & A622 ( 851-224 ); power measurement and analysis bundle TPS2PBND2 ( 712-1145 ); battery TPSBAT ( 481-0867 ) & battery charger TPSCHG ( 481-1290 ); soft carrying case AC2100 ( 481-0845 ) & hard carrying case HCTEK4321 ( 613-1510 ).

Note

Tektronix Oscilloscope Probes

The Tektronix passive voltage oscilloscope probe has a bandwidth of 200MHz and permits selection of 1x or 10x attenuation, using a switch located on the probe head. The probe also provides floating measurement capability up to 30 VRMS with TPS2000 series oscilloscopes only. The P2220 probe is compatible with TDS200, TDS1000, TDS1000B, TDS2000, TDS2000B and TPS2000 series oscilloscopes. The P2221 is compatible with MSO2000 and DPO2000 Series oscilloscopes as well.

Features and Benefits

• Bandwidth for 10:1/1:1 is 200MHz/6MHz
• Attenuation ratio is 10:1/1:1
• Input impedance for 10:1/1:1 is 10Mohm/1Mohm
• Rise time for 10:1/1:1 is <2.2ns/50ns
• Safety category voltage is 150V, 300V

Applications

• Relative low frequency measurements
• Low-frequency computer and telecom measurements
• Power supplies
• Low frequency amplifiers

Certifications

• UL3111-1
• CSA1010.1
• EN61010-1
• EN61010-2-031
• IEC61010-2-031
• CAT II 15 V
• CAT II 300 V

Specifications
Attribute Value
Probe Type Passive
Attenuation 1:1, 1:10
Bandwidth 200MHz
Model Number p P2220
Safety Category Level CAT II
Safety Category Voltage 150 V, 300 V
Series TPS2000
Safety Category CAT II 15 V, CAT II 300 V
Temporarily out of stock - back order for despatch 25/03/2020, delivery within 1 working days from despatch date.
Price (ex. GST) Each
$ 271.23
(exc. GST)
$ 311.91
(inc. GST)
units
Per unit
1 +
$271.23
Related Products
Compact, ergonomically designed probes (non-modular) for oscilloscopes. Integral ...
Description:
Compact, ergonomically designed probes (non-modular) for oscilloscopes. Integral compensation trimmer. Cable length 1.2m Termination 50Ω BNCVoltage category IEC1010-2-031 300V Cat 1Test voltage 1150VFor accessories kit ( 1 screw driver, 1 BNC adaptor, 1 ground lead, 1 test clip, 1 needle ...
For high-speed switch mode power supply design; CAN/LIN ...
Description:
For high-speed switch mode power supply design; CAN/LIN bus design; high-speed digital design; digital design and characterization; manufacturing engineering test; research and development. ±42 V (DC + pk AC) differential input voltage 18 dB CMRR (at 250 MHz 50X attenuation) ...
Compact design with a 2.5mm probe tip diameter ...
Description:
Compact design with a 2.5mm probe tip diameter provides better visibility to the circuit under test than conventional 5mm or 3.5mm probe tips. This makes it easier to probe today’s fine pitched space ICs and components. The replaceable probe tip ...
High quality passive voltage probes suitable for use ...
Description:
High quality passive voltage probes suitable for use with Tektronix oscilloscopes or as general purpose replacements. Each probe features compensation trimmers to allow matching to instruments. Supplied complete with accessories. Rated voltage CAT II 300V rms, CAT I 400V rms. ...