Keysight Technologies N2870A Oscilloscope Probe, Probe Type: Passive 35MHz

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

Keysight N2870A Series Passive Probes and Accessories

Compact design with a 2.5mm probe tip diameter provides better visibility to the circuit under test than conventional 5mm or 3.5mm probe tips. This makes it easier to probe today’s fine pitched space ICs and components. The replaceable probe tip is also spring loaded, keeping it from slipping off the device being probed. To minimize the inductive effects that cause ringing of high speed signals, the innovative ground blade or spring ground connection can be used. Adhesive copper pads provided with the probe can be attached on top of an IC and connected to its ground pins to create a convenient ground plane for the probe to connect to. When used with the ground blade this method provides an ideal ground connection for probing signals with high frequency contents. The IC cap fits over the probe tip, providing a convenient self-aligning connection to fine-pitch IC pins.

Weight (probe only) 48g
Cable length 1.3m
Operating temperature 0 °C to +50°C
Non-operating temperature -40 °C to +70°C
Operating altitude 2000 m (6,561ft)
Non-operating altitude 15,000m (49,212 ft)
Operating humidity 80% room humidity for temperatures up to 31 °C, decreasing linearly to 40% at 50°C
Pollution degree 2

Note

Probe ID readout: compatible with Agilent's InfiniiVision and Infiniium series oscilloscopes

Supplied with

1 spring-loaded probe tip, 4 spare probe tips (2 spring-loaded and 2 rigid) and 5 different IC caps for IC lead pitches from 0.5mm to 1.27mm

Passive Oscilloscope Probes

Note

All the products in this range are supplied for use with instruments with a permanent earth connection.

Specifications
Attribute Value
Probe Type Passive
Attenuation 1:1
Bandwidth 35MHz
Connector Type BNC
Model Number p N2870A
Safety Category Level CAT II
Safety Category Voltage 55V
Series N287XA
Safety Category CAT II 55V
Temporarily out of stock - back order for despatch 05/11/2020, delivery within 1 working days from despatch date.
Price (ex. GST) Each
$ 518.24
(exc. GST)
$ 595.98
(inc. GST)
units
Per unit
1 +
$518.24
Related Products
The Tektronix MSO2000B series 200MHz mixed-signal oscilloscope offers ...
Description:
The Tektronix MSO2000B series 200MHz mixed-signal oscilloscope offers a 7inch widescreen TFT-LCD colour display. This product has 4 analogue and 14 digital channels. By using this oscilloscope users can quickly find and diagnose problems in complex designs with up to ...
The Teledyne Le. Croy HVFO103 (RS 136-8330) is ...
Description:
The Teledyne Le. Croy HVFO103 (RS 136-8330) is a high voltage (HV) fibre-optically isolated 60MHz oscilloscope probe that is designed for the measurement of small signals floating on a high voltage bus in power electronics designs. Optical isolation between the ...
The Rohde & Schwarz RT-ZS 6GHz single-ended active ...
Description:
The Rohde & Schwarz RT-ZS 6GHz single-ended active probe with micro button is used to accurately measure ground-referenced signals. They precisely measure both high-speed and low-frequency signals for which it is critical that the probe impedance places only a minimal ...
The Rohde & Schwarz passive probes are the ...
Description:
The Rohde & Schwarz passive probes are the all-rounders in the world of probes. They are low-cost, general purpose probing solutions for a broad range of applications. Passive probes with readout pin enable Rohde & Schwarz oscilloscopes to automatically detect ...