Keysight Technologies N2873A Oscilloscope Probe, Probe Type: Passive 500MHz

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

Keysight N2870A Series Passive Probes and Accessories

Compact design with a 2.5mm probe tip diameter provides better visibility to the circuit under test than conventional 5mm or 3.5mm probe tips. This makes it easier to probe today’s fine pitched space ICs and components. The replaceable probe tip is also spring loaded, keeping it from slipping off the device being probed. To minimize the inductive effects that cause ringing of high speed signals, the innovative ground blade or spring ground connection can be used. Adhesive copper pads provided with the probe can be attached on top of an IC and connected to its ground pins to create a convenient ground plane for the probe to connect to. When used with the ground blade this method provides an ideal ground connection for probing signals with high frequency contents. The IC cap fits over the probe tip, providing a convenient self-aligning connection to fine-pitch IC pins.

Weight (probe only) 48g
Cable length 1.3m
Operating temperature 0 °C to +50°C
Non-operating temperature -40 °C to +70°C
Operating altitude 2000 m (6,561ft)
Non-operating altitude 15,000m (49,212 ft)
Operating humidity 80% room humidity for temperatures up to 31 °C, decreasing linearly to 40% at 50°C
Pollution degree 2

Note

Probe ID readout: compatible with Agilent's InfiniiVision and Infiniium series oscilloscopes

Supplied with

1 spring-loaded probe tip, 4 spare probe tips (2 spring-loaded and 2 rigid) and 5 different IC caps for IC lead pitches from 0.5mm to 1.27mm

Passive Oscilloscope Probes

Note

All the products in this range are supplied for use with instruments with a permanent earth connection.

Specifications
Attribute Value
Probe Type Passive
Attenuation 1:10
Bandwidth 500MHz
Connector Type BNC
Model Number p N2873A
Safety Category Level CAT I, CAT II
Safety Category Voltage 300 V, 400 V
Series N2870A
Safety Category CAT I 400 V, CAT II 300 V
Temporarily out of stock - back order for despatch 04/12/2019, delivery within 1 working days from despatch date.
Price (ex. GST) Each
$ 665.28
(exc. GST)
$ 765.07
(inc. GST)
units
Per unit
1 +
$665.28
Related Products
The TA300 is a 100 kHz bandwidth, single-range ...
Description:
The TA300 is a 100 kHz bandwidth, single-range 40 A AC or DC current probe using the D9 connector specific to the PicoScope 4444 differential oscilloscope. On connection with the scope, the probe is instantly sensed and the vertical range ...
When you use the oscilloscope in its usual ...
Description:
When you use the oscilloscope in its usual context to show and measure circuit shaft formations, you are working in the most common mode for voltage measurements. The differential probe enhances the oscilloscope probe's measuring capabilities with performance conversion, inverters, ...
Tektronix differential probes P6246, P6247 & P6248 enable ...
Description:
Tektronix differential probes P6246, P6247 & P6248 enable users to make time-domain or frequency-domain measurements on high-bandwidth signals commonly found in disk drive, digital IC design (RAMBUS) and communication applications (Gigabit Ethernet, IEEE-1394 Firewire and Fibre Channel). The P6248 comes ...
Isoprobe III 10:1 250MHz test probe set, comprising ...
Description:
Isoprobe III 10:1 250MHz test probe set, comprising of a an Isoprobe III 10:1 250Mhz test lead and a comprehensive assortment of accessories for use with the primary lead, including insulating sleeve, hook clip, coloured clips for probe connecting lead ...