LeCroy PPE4KV Oscilloscope Probe, Probe Type: Passive 400MHz

Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): US
Product Details

Teledyne LeCroy PPE Series High Voltage Passive Probes

LeCroy PPE series probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. New technology, using hybrid circuitry, minimizes ringing and overshoot to provide a precise response. The fixed-attenuation standard probes automatically re-scale any LeCroy 9300C or LC series oscilloscope for the appropriate attenuation factor of the probe.

Features and Benefits:

  • Attenuation ratio is 1000:1

  • Input impedance is 50Mohm (6pF each side to ground)

  • 2-meter cable length

  • Operating temperature of 0 °C to 50 °C

  • Can be adjusted for high frequency testing too

  • CAT I certification

Applications:

  • Testing switching power supplies

  • Motor drives

  • Electric vehicles

  • Testing high voltage

  • Options to test high frequency

What in the box?
Included with the probes are a series of attachments. Listed below is what is included;

  • Trimming Tool

  • Sprung hook

  • IC & non-IC insulation tip (Red)

  • 22 cm ground lead

  • BNC adapter

  • Straight and spring contact tips (0.8mm)

  • Two crocodile clips

  • Flexible 4mm security adaptor

  • Security ground lead

Why Teledyne LeCroy?

Teledyne LeCroy oscilloscopes and probes have been designed, manufactured and tested to the highest standards. This ensures high reliability and quality. In the unlikely event, you experience any problems all Teledyne LeCroy digital oscilloscopes are covered by a 3-year manufactures warranty and probes a 1-year warranty.

Note

Probe Ring: PPE1.2KV = No; PPE20KV, PPE2KV, PPE4KV, PPE5KV, PPE6KV = Yes
Cable Length: PPE20KV = 3m; PPE1.2KV, PPE2KV, PPE4KV, PPE5KV, PPE6KV = 2m
PPE20KV peak voltage = 40kV

Supplied with

Trimming tool, sprung hook, IC insulating tip (red), insulating tip (red), ground lead (22cm), BNC adaptor, straight tip (0.8mm), spring contact tip (0.8mm), crocodile clip, flexible 4mm security adaptor, security ground lead

Specifications
Attribute Value
Probe Type Passive
Attenuation 1:100
Bandwidth 400MHz
Connector Type BNC
Model Number p PPE4KV
Safety Category Level CAT I
Series PEE
Safety Category CAT I
6 In stock for delivery within 7 working day(s)
Price (ex. GST) Each
$ 908.50
(exc. GST)
$ 1,044.78
(inc. GST)
units
Per unit
1 +
$908.50
Related Products
The Testec is active differential oscilloscope probe enables ...
Description:
The Testec is active differential oscilloscope probe enables a conventional oscilloscope to display and measure in-circuit waveforms that are referenced to high common-mode voltages. It is capable of safely measuring differential voltages up to ±1000VAC and 1400VAC/DC. It supports bandwidths ...
The Tektronix oscilloscope probe when coupled with the ...
Description:
The Tektronix oscilloscope probe when coupled with the TPS2000 and THS3000 series digital storage oscilloscopes, delivers both the isolation for the measurement from earth ground and full isolation between the channels. It is the recommended probe for measuring ripple on ...
The Tektronix passive voltage oscilloscope probe is used ...
Description:
The Tektronix passive voltage oscilloscope probe is used on BNC oscilloscopes with 1Mohm/13pF input. It has an attenuation of 10X with 10Mohm input resistance. It is high-quality passive voltage probes suitable for general purpose replacements. Each probe features compensation trimmers ...
Tektronix high voltage probing solutions offer safety and ...
Description:
Tektronix high voltage probing solutions offer safety and accuracy in applications which include: floating measurements; switching power supply design; motor drive design; electronic ballast design; CRT display design; power converter design and service; power device evaluation. Overrange indicator. Safety ...