Pico Technology Oscilloscope Probe, Probe Type: Active, Differential 200MHz 60V

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

Pico 200MHz 20V Differential ProbeTA045, 10:1

Pico TA045 is a 200MHz bandwidth active differential probe suitable for high-speed measurement applications with a differential measurement range of ±20V and a common-mode range of up to ±60V (DC + peak AC). This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high-voltage differential measurements. Applications include making safe measurements in power circuit applications and acquisition of low-speed balanced differential signals found in serial communications buses. The TA045 is optimised for small-signal applications such as telecom measurement, xDSL, high-speed power measurement and differential transmitter and receiver design.

Bandwidth DC to 200MHz (–3 dB)
Attenuation 10:1
Rise time 1.75ns
Accuracy ±1%
Input impedance 500kΩ ll 7pF each side to ground
Differential range ±20V
Common mode range ±60V
Absolute maximum voltage (either input to ground) ±60V
Swing (into 50 Ω load) ±2V
Offset (typical) <±2mV
Noise (typical) 0.3mVRMS
Source impedance (typical) 50Ω
CMRR (typical) 80dB @ 100Hz; 50dB @ 10MHz
Ambient operating temperature -10 to +40°C
Ambient storage temperature -30 to +70°C
Power requirement 4xAA cells or 6VDC/90mA mains adaptor or 9VDC/70mA mains adaptor
Length of input leads 50cm
Length of BNC lead 125cm
Weight 300g
Dimensions 111 x 22 x 14 mm

Pico Technology Oscilloscope Probe

The Pico Technology TA044 active differential oscilloscope probe is suitable for high-speed measurement applications with a differential measurement range of ±20V and a common-mode range of up to ±60V. It can be used with signal speeds of up to 200MHz. This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high voltage differential measurements.

Features and Benefits

• Bandwidth is DC to 200MHz (-3dB)
• Attenuation ratio is 10:1
• Accuracy is ±1%
• Input impedance is 500Kohm ll7pF each side to ground
• Differential range is ±20V
• Common mode range is ±60V
• Absolute maximum voltage (either input to ground) is ±60V
• Swing is ±2V into 50ohm load
• Offset (typical) is <±2mV
• Noise (typical) is 0.3mV RMS
• Source impedance is 50ohm
• CMRR (typical) is 80dB at 100Hz and 50dB at 10MHz
• Ambient operating temperature ranges between -10°C and 40°C
• Power requirement is 4xAA cells or 6VDC/90mA mains adaptor or regulated 9VDC/40mA mains adaptor

Applications

• Safe measurement in power circuit
• Acquisition of low-speed balanced differential signals found in serial communications buses
• Telecom measurement
• xDSL,
• high-speed power measurement and differential transmitter and receiver design.

Certifications

• IEC-1010.1
• IEC-1010.2-031 CAT III
• Pollution Degree 2.

Specifications
Attribute Value
Probe Type Active, Differential
Attenuation 1:10
Bandwidth 200MHz
Maximum Common Mode Input Voltage 60V
Number of Probes 2
Safety Category Level CAT I
Safety Category Voltage ±60V
Safety Category CAT I ±60V
4 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 2,583.88
(exc. GST)
$ 2,971.46
(inc. GST)
units
Per unit
1 +
$2,583.88
Related Products
Description:
Offering up to 200 MHz bandwidth and 1 GS/s sample rate, the MSO2000B Mixed Signal Oscilloscope Series from Tektronix delivers advanced debug features at an entry-level price. Users can quickly find and diagnose problems in complex designs with up to ...
MDO3000 oscilloscopes are designed to meet users' needs ...
Description:
MDO3000 oscilloscopes are designed to meet users' needs and aspirations now and into the future. Each model is multi-functional with integrated basic spectrum analyzer, Wave Inspector Navigation, MSO, serial and parallel bus triggering and analysis, and digital voltmeter. Optional instrument ...
First entry-level oscilloscopes featuring 1GS/s sampling rate and ...
Description:
First entry-level oscilloscopes featuring 1GS/s sampling rate and optional parallel bus trigger and decode modules. "Digital phosphor" technology enables real-time intensity grading of the signal, mimicking the effect of a VT phospor oscilloscope display. 100 MHz, and 200 MHz models1 ...
Compact, ergonomically designed probes (non-modular) for oscilloscopes. Integral ...
Description:
Compact, ergonomically designed probes (non-modular) for oscilloscopes. Integral compensation trimmer. Cable length 1.2m Termination 50Ω BNCVoltage category IEC1010-2-031 300V Cat 1Test voltage 1150VFor accessories kit ( 1 screw driver, 1 BNC adaptor, 1 ground lead, 1 test clip, 1 needle ...