Teledyne LeCroy PP006C Oscilloscope Probe, Probe Type: Passive 500MHz 1:10

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): JP
Product Details

Teledyne LeCroy Passive Probe PP006C

Passive probes are the standard probe provided with most oscilloscopes. They are also sold as separate items and as replacements. The PP006C has 500 MHz bandwidth, 12 pF input capacitance and 5 mm probe tip diameter. It is typical of passive probes in that it provides a 10:1 attenuation and features a high resistance of 10 MΩ. Its high input resistance makes the passive probe a choice instrument for low frequency signals, because circuit loading at such frequencies is minimised. Passive probes are designed to handle voltages of at least 400 V. The PP006C handles up to 500 V. Teledyne LeCroy passive probes feature an attenuation sense pin which activates the oscilloscope to scale waveforms automatically, with no operator input.

Note

The PP006C passive probe is compatible with Teledyne LeCroy WaveJet Touch oscilloscopes. Using the appropriate passive probe with an oscilloscope means the probe will be properly compensated across the entire bandwidth. Otherwise compensation will be for low frequencies only.

Supplied with

Sprung hook, ground lead 11 cm, ground lead on probe tip, IC insulating tip, colour bands (yellow, red, blue, green - 2 off each), trimmer tool

Passive Oscilloscope Probes

Note

All the products in this range are supplied for use with instruments with a permanent earth connection.

Specifications
Attribute Value
Probe Type Passive
Attenuation 1:10
Bandwidth 500MHz
Model Number p PP006C
Safety Category Level CAT I, CAT II
Safety Category Voltage 300 Vrms, 350 Vrms, 1400 (Transient Over Voltage) V
Series WaveJet Touch
Safety Category Cat I 1400 (Transient Over Voltage) V, Cat I 350 Vrms, Cat II 300 Vrms
5 In stock for delivery within 7 working day(s)
Price (ex. GST) Each
$ 600.69
(exc. GST)
$ 690.79
(inc. GST)
units
Per unit
1 +
$600.69
Related Products
The Rohde & Schwarz passive probes are the ...
Description:
The Rohde & Schwarz passive probes are the all-rounders in the world of probes. They are low-cost, general purpose probing solutions for a broad range of applications. Passive probes with readout pin enable Rohde & Schwarz oscilloscopes to automatically detect ...
The P6243 active FET probe is the high ...
Description:
The P6243 active FET probe is the high performance probing solution for 500 MHz oscilloscopes. Complete with a probe-only bandwidth of 1 GHz, it will provide a 500 MHz system bandwidth when used with the Tektronix full line of 500 ...
The Tektronix single-ended Active FET oscilloscope probe provides ...
Description:
The Tektronix single-ended Active FET oscilloscope probe provides excellent high-speed electrical and mechanical performance required for digital system designs. It is specifically designed for direct connection to oscilloscopes with the TekVP probe interface.Note:TAP1500 includes individual probe case. Supplied ...
Compact design with a 2.5mm probe tip diameter ...
Description:
Compact design with a 2.5mm probe tip diameter provides better visibility to the circuit under test than conventional 5mm or 3.5mm probe tips. This makes it easier to probe today’s fine pitched space ICs and components. The replaceable probe tip ...