Osram Opto KOM 2125-Z IR + Visible Light Si Photodiode, 60 °, Surface Mount DIP

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

PIN Photodiode KOM 2125

Two photodiodes mounted side-by-side.

Diode A sensitive area: 2 x 2mm
Diode B sensitive area: 2 x 5mm

Photodiodes, OSRAM Opto Semiconductors

Specifications
Attribute Value
Spectrums Detected Infrared, Visible Light
Wavelength of Peak Sensitivity 850nm
Package Type DIP
Mounting Type Surface Mount
Number of Pins 3
Diode Material Si
Minimum Wavelength Detected 400nm
Maximum Wavelength Detected 1100nm
Length 8.5mm
Width 4.5mm
Height 1.2mm
Angle of Half Sensitivity 60 °
Polarity Forward
On back order for despatch 12/05/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each (On a Reel of 1400)
$ 7.676
(exc. GST)
$ 8.827
(inc. GST)
units
Per unit
Per Reel*
1400 +
$7.676
$10,746.40
*price indicative
Related Products
The TCS34717 device provides Red, Green, Blue, and ...
Description:
The TCS34717 device provides Red, Green, Blue, and Clear (RGBC) light sensing that detects light intensity under various lighting conditions. A programmable wait state timer provides the ability of low-power mode, in between RGBC measurements. 1000000:1 dynamic range. Four independent ...
The AEDR-8300 is a Reflective Optical Encoder for ...
Description:
The AEDR-8300 is a Reflective Optical Encoder for motion control applicationsAEDR-8300 contains a LED light source and a photo-detector in a same surface mount small package. The output delivers two signals in quadrature with direction sensing.Codewheel or Codestrip is required ...
The TSL1401CL linear array from Austriamicrosystems consists of ...
Description:
The TSL1401CL linear array from Austriamicrosystems consists of integrating photosensing pixels. These pixels measure incident light over a user-defined exposure time and generate a voltage or digital output which represents the light exposure at each pixel. The analogue output may ...
The OSRAM Opto Semiconductors chip LED silicon PIN ...
Description:
The OSRAM Opto Semiconductors chip LED silicon PIN photodiode has a photocurrent rating of 1.5μA and a peak wavelength rating of 890nm. It is used for industrial automation (machine controls, light barriers, vision controls). • ESD: 2kV• Especially suitable for ...