Jumo 2 wire PT100 Sensor, -50°C min +600°C max, 200mm Probe Length x 3mm Probe Diameter

  • RS Stock No. 337-6940
  • Mfr. Part No. 902250/32-415-1003-1-3-200-11-2500/000
  • Manufacturer Jumo
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Sheathed resistance thermometer in accordance with IEC 751

Working temperature from -50 °C → +600 °C
Flexible, thin-walled sheathed wire made of stainless steel; the low-ohm copper internal conducting wires are embedded in compressed, fire-resistant magnesium oxide for vibration resistance
Two or three-conductor circuit
Rapid response times
Connection lead made of silicon, 2.5 m, cable temperature range: -50 °C → +180 °C
Application-specific installation lengths

Application

Chemical plants, power plants, pipelines, in engine building, on test benches and at all measurement sites where flexibility and problem-free replacement are desirable

Specifications
Attribute Value
Sensor Type PT100
Probe Length 200mm
Probe Diameter 3mm
Minimum Temperature Sensed -50°C
Maximum Temperature Sensed +600°C
Termination Type Cable
Cable Length 2.5m
Number Of Wires 2
Accuracy Class B
Response Time 4 (Water) s, 41 (Air) s
2 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 118.09
(exc. GST)
$ 135.80
(inc. GST)
units
Per unit
1 - 4
$118.09
5 - 9
$115.76
10 +
$114.51
Related Products
This range of PT100 probes enables temperature measurement ...
Description:
This range of PT100 probes enables temperature measurement under pressure in motors, compressors, plant engineering and ship building. They are highly resistant to shock and vibration and easy to connect with shockproof connector. Temperature range -50°C to +300°CTemperature measurement with ...
Screw-in resistance thermometer with sealable connection head, form ...
Description:
Screw-in resistance thermometer with sealable connection head, form JVarious installation lengths available. Two versions available-400 °C type: with continuous protection tube-200 °C type: with recessed protection tube for air measurement. Process connection G1/2Protection tube: Stainless steel 1. 4571, Ø 7 ...
Sensors with one or two Pt 100, Class ...
Description:
Sensors with one or two Pt 100, Class A as per IEC751.3-wire or 2 x 3 wire fitting.316L stainless steel protected with hard-packed MgO insulation.Type A DAN connection head with BLS terminal block and PG16 cable gland output.
Duplex PRT’s with two independent PT100 detectors inside ...
Description:
Duplex PRT’s with two independent PT100 detectors inside the tip of the probe. This allows one probe to be connected to two measurement or control devices; alternatively one sensor may be used as a primary and the other as a ...