Pepperl + Fuchs Interface Module for use with Industrial Sensor AS-Interface

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): VN
Product Details

Accessories

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring
High data speed
Low cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other fieldbus systems
User-friendly
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand alone use
Able to use standard sensors and actuators (using modules)

Specifications
Attribute Value
Accessory Type AS-Interface Splitter Box
For Use With Industrial Sensor AS-Interface
Application Industrial
Series VAZ
Termination Plug-In
19 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 18.70
(exc. GST)
$ 21.50
(inc. GST)
units
Per unit
1 +
$18.70
Related Products
The Microchip MM7150 Motion Sensor Module is a ...
Description:
The Microchip MM7150 Motion Sensor Module is a fully integrated inertial measurement device suitable for a wide range of applications requiring motion and 3D positioning data. The module incorporates MEMS technology coupling an accelerometer, gyroscope and magnetometer with Microchip’s SSC7150 ...
The Pmod ESP32 provides an easy and cost ...
Description:
The Pmod ESP32 provides an easy and cost effective way to add wireless communication to any host platform or project. It uses the fully certified ESP-WROOM-32 Wi-Fi + BLE + BT module from Espress if Systems. It is suitable for ...
This quad-bearing gimbal joystick provides a two-axis resistive ...
Description:
This quad-bearing gimbal joystick provides a two-axis resistive output for controlling parameters such as position, velocity and tilt. It can be interfaced to any microcontroller with at least two analogue input channels. 5 kΩ linear-taper potentiometer on each axis. Smooth ...
Communications connector: 4 x RJ‑45 jacks with MDI‑X ...
Description:
Communications connector: 4 x RJ‑45 jacks with MDI‑X assignment 10/100 Mbps (half / full duplex), autopolarity, autonegotiation. Network cable: A standard Ethernet cable can be connected to the Ethernet interface. However, to minimize electromagnetic interference, Siemens recommends a shielded Ethernet ...