Mitsubishi FX2N Series PLC I/O Module 16 Outputs 24 V dc, 90 x 40 x 87 mm

  • RS Stock No. 320-9121
  • Mfr. Part No. FX2N-16EYR-ES/UL
  • Manufacturer Mitsubishi
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): JP
Product Details

Digital Expansion Blocks

These are available in 8 or 16 input or output point sizes. They attach directly to the right hand end of the Base Unit or Expansion Unit (see Digital Expansion Units below) which also provides them with power. Input blocks are opto-isolated, 24Vdc sink or source selectable to suit NPN or PNP sensors, and output blocks are available with relay or transistor outputs. The number of blocks that may be added depends on a number of factors. However, as a guide, with the FX1N, blocks up to 32 I/O can be added. Further expansion (of FX1N and FX2N) is achieved by adding an Expansion Unit (see 2 below), which in turn can be further expanded by adding more Expansion Blocks. With the FX2N, the number of I/O that can be added depends on the size of the Base Unit. For 16 and 32 I/O FX2N base units and 32 I/O Expansion units, up to 32 inputs, or 24 outputs, or (for example) 24 inputs and 8 outputs can be added. For larger Base and Expansion Units, up to 64 inputs, or 48 outputs, or (for example) 32 inputs and 24 outputs can be added. For full configuration details and limitations, please refer to the FX1N and FX2N Hardware Manuals.

Mitsubishi Digital Expansion Blocks

The Mitsubishi digital expansion blocks attach directly to the right-hand end of the base unit or expansion unit (see Digital Expansion Units below), which also provides them with power. This module has 16 relay type outputs. Input blocks are opto-isolated. The number of blocks that may be added depends on the size of the base unit.

Features and Benefits

• LEDs for indicating input and output status
• 24VDC sink or source selectable to suit NPN or PNP sensors
• Output blocks are available with relay or transistor outputs
• Compact design
• Vertically terminal blocks with a cable guide to the upper and lower side

Applications

• Industrial automation
• Robotics
• Automobile industry

Certifications

• IP10 rated
• ANSI/ESD S20.20:2014
• BSEN 61340-5-1:2007

Additional Modules for Mitsubishi FX1S, FX1N & FX2N PLC's

Products in this range are for use with FX1S, FX1N and FX2N PLC, unless specified otherwise. All are DIN rail mount and are 90mm high and 87mm deep. The width varies and is tabled below.

All of the following products, except the Extension Cable, attach directly to the right hand end of the previous unit, block or module using the short integral lead.

Specifications
Attribute Value
Manufacturer Series FX2N Series
Number of Outputs 16
Output Type Relay
For Use With FX2N Series
Voltage Category 24 V dc
Module Type Output Module
Length 90mm
Width 40mm
Depth 87mm
Dimensions 90 x 40 x 87 mm
9 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 650.19
(exc. GST)
$ 747.72
(inc. GST)
units
Per unit
1 +
$650.19
Related Products
Equipped with astounding memory and performances, this featherweight ...
Description:
Equipped with astounding memory and performances, this featherweight version will inspire your applications with new momentum. Designed to operate in total synergy with other Schneider Electric devices, Modicon M340 a building block towards your total solution. A pushbutton on the ...
BMX discrete I/O modules are standard format (1 ...
Description:
BMX discrete I/O modules are standard format (1 slot). They have a case, which ensures IP20 protection of the electronics, and are locked into postion by a captive screw. Data rate: 20kb/s to 1Mb/s (bus length dependent)Internal RAM capacity: 4Mb ...
The BMX AMM 0600 module is a high-level ...
Description:
The BMX AMM 0600 module is a high-level analogue input/output module with 4 non-isolated voltage or current inputs and 2 non-isolated voltage (±10V) and current outputs. The module offers:. Protection of the module against overvoltages. Conversion of digital signals (11 ...
Used to interface between a S7-22X CPU and ...
Description:
Used to interface between a S7-22X CPU and a Profibus DP network. Can be simultaneously operated as MPI and DP slaveMPI protocol enables simultaneous data exchange with MPI masters. Allows an S7-200 CPU to be connected to a Profibus DP ...