SMC Membrane G 1/8 Pneumatic Air Dryer +55°C -5°C, 0.85Mpa

  • RS Stock No. 667-9309
  • Mfr. Part No. IDG3-F01
  • Manufacturer SMC
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

IDG Series, Membrane Air Dryer

SMC's Membrane air dryer series IDG is available in a single unit or combination unit style. IDG/M models combine a mist separator and micro mist separator with a single unit. IDG/V models combine a regulator with the IDG/M model. Options available include one-touch fitting exhaust of purge air. If purged air is not exhausted around membrane air dryer, air is exhausted with tubing away from its dryer.

A reliable, efficient and an economical alternative to pressure swing and refrigerant dryer technologies.

Compact and lightweight
No power supply required
Discharged air noise reduced with in-built silencer
No vibration or heat discharge
Modular design for additional filtration
Membrane air dryer series
Single unit style
Various sizes available
Port sizes: 1/8" to 1/2"


Flow rates measured as outlet/purge l/min

Dry Air Systems

Compressed air is an essential power source that is widely used throughout industry. This safe, powerful and reliable utility can be the most important part of a production process. However compressed air will contain water, dirt, wear particles, bacteria and even degraded lubricating oil which all mix together to form an unwanted abrasive sludge. This sludge, often acidic, rapidly wears tools and pneumatic machinery, block valves and orifices causing high maintenance and costly leaks. It also corrodes piping systems and can bring a production process to an extremely expensive standstill. Only compressed air that is totally clean and dry will ensure maximum savings.

Attribute Value
Manufacturer Series IDG
Type Membrane
Inlet Port Size G 1/8
Outlet Port Size G 1/8
Dew Point -20°C
Typical Flow Rate 6 (Purge) L/min, 25 (Outlet) L/min
Maximum Ambient Operating Temperature +55°C
Minimum Ambient Operating Temperature -5°C
Minimum Process Operating Temperature -5°C
Maximum Process Operating Temperature +55°C
Maximum Operating Inlet Pressure 0.85MPa
Ambient Operating Temperature Range -5 → +55°C
Minimum Operating Inlet Pressure 0.3MPa
Inlet Port Thread Standard G
Process Operating Temperature Range -5 → +55°C
2 In stock for delivery within 7 working day(s)
Price (ex. GST) Each
Was $1,010.49
$ 572.00
(exc. GST)
$ 657.80
(inc. GST)
Per unit
1 +
Related Products
The Rapid Dry Jet in white (RAPJET-W) from ...
The Rapid Dry Jet in white (RAPJET-W) from Fantech Trade is a modern and powerful hand dryer unit. It works by placing your hands into the gap where automatic IR sensors which turns the hand dryer on. Concentrated air is ...
The Mitsubishi Jet Towel Smart Hand Dryer is ...
The Mitsubishi Jet Towel Smart Hand Dryer is an excellent, class leading hand dryer, with a number of innovative features which result in short drying times, highly efficient running costs and hygienic operation. The Jet Towel Smart is a 'hands-under' ...
Parker Balstron cabinet dryers can reduce the humidity ...
Parker Balstron cabinet dryers can reduce the humidity in electrical cabinets to less than 10 %. Dry air is supplied to the cabinet at a dew point of less than -18°C removing moisture from inside the cabinet and keeping out ...
Membrane air dryer series. Energy saving. Single unit ...
Membrane air dryer series. Energy saving. Single unit style5 sizes available. Port sizes: 1/4" to "