Festo Pneumatic Cylinder 12mm Bore, 30mm Stroke, ADN Series, Double Acting

  • RS Stock No. 136-6761
  • Mfr. Part No. ADN-12-30-A-P-A
  • Manufacturer Festo
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

ADN ISO 21287 Pneumatic Cylinders- Flexible Cushioning

FESTO ADN series of compact pneumatic cylinder are up to 50% smaller than standard pneumatic cylinders for maximum productivity in confined spaces. These double acting pneumatic actuators have dual connection ports for compressed air to be applied for advancing and retracting the piston rod. The extensive range of stroke length and bore size variants in the ADN series can be configured to suit a broad range of applications.

Pneumatic Cylinder Operation
The ADN series is a double acting actuator with air applied to extend and to retract the piston in a linear motion to the desired stroke length. Magnetic piston rods allow contactless position detection via a proximity sensor mounted in slots along the cylinder body.

Cylinders are fitted with flexible polymer end cushioning helping to reduce noise and vibration, prolong service life and increase production and productivity.

Features and Benefits

Complies with ISO 21287 standard
Slots for flush mounting proximity sensors
Low friction design allowing for continuous operation
Cushioning requires no adjustment saving maintenance time and cost

How do I mount the pneumatic cylinder?

The ADN series pneumatic actuators can be mount horizontally or vertically to suit the required application. Optional mounting accessories provide further flexibility allowing the cylinder to be attached with a swivel bracket for free movement, foot mounted for support under high loads or combined with other actuators to give a wider range of movement.


Attribute Value
Stroke 30mm
Bore 12mm
Action Double
Manufacturer Series ADN
Pneumatic Connection M5
Piston Rod Thread Gender Male
Dimensions 27.5 x 27.5 x 69.2mm
Length 69.2mm
Width 27.5mm
Maximum Operating Pressure 10 bar
Height 27.5mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +80°C
2 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 139.50
(exc. GST)
$ 160.42
(inc. GST)
Per unit
1 +
Related Products
Magnetic piston as standard across range. Stainless steel ...
Magnetic piston as standard across range. Stainless steel piston rod. Anodised aluminium alloy barrel and end caps. Polyurethane nitrile rubber seals. Very compact - approximately one third the length of a corresponding ISO model. Spring return on single-acting models. Temperature ...
Compact single and double acting cylinders, considerably shorter ...
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight saving. Magnetic piston. Proof pressure 15bar. Operating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar max. Supplied with tapered and parallel ports.
Festo DFM series pneumatic guided cylinders are double ...
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications ...
SMC Dual-Rod Cylinders with slide bearings (CXSM type) ...
SMC Dual-Rod Cylinders with slide bearings (CXSM type) or ball bearing slides (CXSL type), suitable for 'pick-and-place' applications, operating with non-lubricated, filtered, compressed air. Dual-Rod Cylinders feature high non-rotational accuracy, dual port locations, and standard magnetic sensing and buffer ...