SMC 8mm C3604, PBT, PP Cap

  • RS Stock No. 873-2682
  • Mfr. Part No. KQ2C08-00A
  • Manufacturer SMC
Technical data sheets
Legislation and Compliance
Non Compliant
COO (Country of Origin): JP
Product Details

Tubing Cap KQ2C

The KQ2C one-touch tube caps are used to plug unused nylon and polyurethane tubes. The special profile design of these fittings provides positive sealing under pressure. When the tubing cap is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively.

The special profile design of the seal provides positive sealing under pressure without reduced flow
Release button allows tube to be removed easily without damage
Maximum operating pressure 10 bar
Maximum vacuum operating pressure -100kPa
Proof pressure 3MPa
Ambient and fluid temperature -5 to +60°C (water 0 to 40°C)

Note

Models with a -X2 suffix in the Mfr Part No. are copper-free (electroless nickel plated).

Tube-to-Tube Fittings & Plugs

Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance.

Maximum operating pressure 10 bar
Maximum vacuum operating pressure -100kPa
Proof pressure 3MPa
Ambient and fluid temperature -5 to +60°C (water 0 - 40°C)

Specifications
Attribute Value
Tube Size 8mm
Material C3604, PBT, PP
Overall Length 20.5mm
Product Type Tube Cap
Outer Diameter 15.2mm
For Use With KQ2C Series
35 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Pack of 5)
$ 39.406
(exc. GST)
$ 45.317
(inc. GST)
units
Per unit
Per Pack*
5 +
$39.406
$197.03
*price indicative
Related Products
Heat shrinkable end caps used for sealing cable ...
Description:
Heat shrinkable end caps used for sealing cable ends and provide mechanical and environmental protection. Heat shrink heavy duty end caps rapidly shrink. The melted adhesive lining flows and covers the substrateA flexible bond is formed with variety of rubbers, ...
Female parallel thread blanking cap. Manufactured from steel ...
Description:
Female parallel thread blanking cap. Manufactured from steel to BS5200 with a zinc yellow chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 to ...
Female parallel thread blanking cap. Manufactured from steel ...
Description:
Female parallel thread blanking cap. Manufactured from steel to BS5200 with a zinc yellow chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 to ...
Resistant to solvents, oils greases and other chemical ...
Description:
Resistant to solvents, oils greases and other chemical agents. Cap has a valve which opens when pressure exceeds 10 mb. This type of valve breather cap is used when air that has exceeded a certain pressure has to be expelledA ...