Valsteam ADCA Pneumatic Valve

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): PT
Product Details

Control Valves PV25S

The PV25S control valves are single seated, with 2-way body construction and in-line straight connections. These PV25 valves have been designed for accurate control in any process condition.

Features and Benefits

• Single seated, two way, direct or reverse action valve
• Valve top flange permanently attached to the body
• Metal to metal sealing as standard
• PV25S Cast steel

Application Information

The wide application ranges of these control valves enables their use with saturated and superheated steam, hot and superheated water, air, gases and other non-corrosive fluids.

Materials

Valve body – ASTM A216WCB/1.0619/GP240GH/1.0619
Bonnet – CF8/1.4308
Actuator – S235JRG2/1.0038
Yoke – C45E/1.1191

Pneumatic Control Valves

Specifications
Attribute Value
Default Valve Position NC, NO
Return Type Direct Action
Maximum Working Pressure 3.5 bar
Thread Size 1/4in
On back order for despatch 17/11/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each
Was $3,865.00
$ 3,638.84
(exc. GST)
$ 4,184.67
(inc. GST)
units
Per unit
1 +
$3,638.84
Related Products
316L stainless steel construction, fully machined from quality ...
Description:
316L stainless steel construction, fully machined from quality forgingsEPDM seals. Creep resistant bearings. Reinforced nylon handle. Reduced risk of contamination by top and bottom seals. Operating temperature -10ºC to +120°CWorking pressure 0.9 bar to 10 bar. Polished disc.
The fruit of much work with plumbing contractors ...
Description:
The fruit of much work with plumbing contractors and manufacturers of hot water storage heaters, the SFR will be of great interest to professionals and fully meet the most demanding expectations. Advantages:Fast filling rate of more than 4000 L/h under ...
Applications: Steam. Min. Set pressure 0.2 barg. Overpressure ...
Description:
Applications: Steam. Min. Set pressure 0.2 barg. Overpressure 10%Blowdown Gases 10%, liquids 20%Connections: Threaded BSP / NPTDischarge coefficients k= 0.55 for gases, k= 0.48 for liquids. Design EN-12516-1, EN-4126-1/7DIN 259 and ANSI B2.1Rating PN-40Material Stainless steel 316LMaterials ENTemperature range -10 ...
The Parker V4 A-LOK series needle valve has ...
Description:
The Parker V4 A-LOK series needle valve has an inline orientation with 1/4in double ferrule tube fitting ends, blunt (hard seat) stem configuration and Teflon stem packing. This valve is designed to provide positive, leak-tight shut-off and coarse regulation of ...