Festo Soft Start Valve Pilot/Spring G 1/2 MS6 Series

  • RS Stock No. 122-8226
  • Mfr. Part No. MS6-DL-1/2
  • Manufacturer Festo
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): HU
Product Details

MS-DL Series Soft Start Valves

The Festo MS-DL series of pneumatically actuated soft start valves allow pressure to be gradually built up when turned on, preventing sudden and erratic movements at the actuator. The valve uses a direct external pilot for switching and switching can be adjusted for the required time delay.

Features and Benefits

  • A pressure gauge or sensor can be installed for system monitoring

  • Module connector for connection to MS4 or MS6 combination air preparation units is available

  • The switching pressure for this series is approximately 50% of set pressure

What is a soft start valve?

Soft start valves throttle gas flow to prevent turbulence in machine cylinders, to avoid damage to pneumatic engines.

Soft-start Valve MS6-DL-1/2

  • Piston poppet valve design

  • Non-reversible flow direction

  • Assembly possible in any position

  • Throttable exhaust air function

  • Mechanical spring reset

  • Operating pressures of up to 18 bar

  • The valve has a standard nominal flow rate 6,450 I/min

  • G1/2 pneumatic connection

  • The materials used are free of copper and PTFE, also conforming to RoHS

Soft Start and Quick Exhaust Valves

Specifications
Attribute Value
Manufacturer Series MS6
Connection Port Thread G 1/2
Actuation Type Pilot/Spring
Body Material Aluminium
Maximum Flow Rate 6400 (Relief Direction) L/min, 6450 (Main Flow Direction) L/min
Minimum Operating Pressure 4bar
Minimum Operating Temperature -10°C
Maximum Operating Temperature +60°C
Hazardous Area Certification ATEX
Maximum Operating Pressure 18 bar
Number of Ports 2
Number of Positions 2
Thread Size 1/2in
Thread Standard BSPP
5 Within 5 working day(s) (Global stock)
6 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
Was $223.83
$ 187.46
(exc. GST)
$ 215.58
(inc. GST)
units
Per unit
1 +
$187.46
Related Products
Modular solenoid valves and accessories that have been ...
Description:
Modular solenoid valves and accessories that have been designed for manifold assembly, and DIN rail mounting.The valves act as a functional interface between electrical/electronic control systems and pneumatic drives.Main Features:. Electrical & air connections via sub base.
Modular with orientable solenoid coils and plugs for ...
Description:
Modular with orientable solenoid coils and plugs for easy installation. Choice of solenoid coils, ordered separately. Captive ’O’ ring soft seal, spool valve design. Electrical connection 22mm ind std. Protection rating IP65Zinc die cast body. Aluminium/glass filled nylon end caps. ...
The VZWM series valves are suitable for use ...
Description:
The VZWM series valves are suitable for use with both air and water. The valves operate with diaphragm technology and differential pressure with an armature tube for fitting a solenoid coil of your choice. There is a large range of ...
The FESTO CPE series of universal solenoid valves ...
Description:
The FESTO CPE series of universal solenoid valves offer the maximum flow rate with minimum installation space, featuring high performance valves with a long service life. The CPE range is ideal for applications in optimised process sequences and working cycles. ...