Microchip Battery Charger for MCP19111

  • RS Stock No. 111-5749
  • Mfr. Part No. ADM00513
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

MCP19111 Battery Charger Evaluation Board

The Microchip MCP19111 Evaluation Board is a platform that demonstrates the MCP19111 PWM Controller in a multi-chemistry battery charger application. The board can charge NiMH batteries of up to seven cells, Li-Ion batteries of up to four cells, VRLA batteries of up to six cells and LiFePO4 batteries of up to five cells. The featured device dynamically regulates the amount of charge current and the type of charging as per the battery state reading.

The board provides all the needed circuitry to get a working demonstration up and running and allows the MCP19111 to be easily customised. A bespoke MCP19111 Battery Charger Graphical User Interface (GUI) is used to monitor and configure the MCP19111. Programming of the MCP19111 can be achieved using MPLAB X IDE and MPLAB XC8 Compiler.

The featured MCP19111 is a digitally-enhanced PWM Controller. The device integrates an 8-bit PIC Microcontroller with a PWM Current Mode Controller to provide a flexible and customisable Buck Controller solution. The PWM Controller regulates the output of the DC/DC converter while the MCU dynamically customises the device. Operating parameters, start-up and shut-down profiles, protection levels and fault handling procedures can all be tailored to create a high efficiency buck converter.

Features

Demonstrates MCP19111 Digitally-Enhanced PWM Controller
Charges Li-Ion, NiMH, VRLA, Lead-Acid and LiFEPO4 Batteries
Highly Efficient Buck Converter
Input Voltage: 6V to 32V
Charge Current: 6A maximum
Graphical User Interface (GUI) for Device Configuration and Monitoring
6-Pin Connectors for PICkit Serial Analyser and PICkit In-Circuit Programmer

Kit Contents

1 x MCP19111 Battery Charger Evaluation Board

PWM (Pulse Width Modulation) Controllers, Microchip

Specifications
Attribute Value
Power Management Function Battery Charger
Kit Classification Demonstration Board
Featured Device MCP19111
3 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 117.72
(exc. GST)
$ 135.38
(inc. GST)
units
Per unit
1 +
$117.72
Related Products
Cotek CX 3 stage battery chargers are microprocessor ...
Description:
Cotek CX 3 stage battery chargers are microprocessor controlled for fast and accurate charging of all deep-cycle batteries. Universal AC input with active PFCCompatible with Lead Acid, Li-ion, Gel and AGM batteries. Support remote controller CR-1 as optional accessory.Voltage / ...
TPS2PBND: Service package for series TPS2000 oscilloscopes (contains ...
Description:
TPS2PBND: Service package for series TPS2000 oscilloscopes (contains 4 passive P5120 high voltage probes and TPS2PWR1 software)TPS2PWR1: Application package for performance analysis. Instant analysis of power signal, signal analysis, harmonic analysis, transient power loss, phase angle, dV / dt and ...
Battery charger for use with Tektronix TDS3000C Series ...
Description:
Battery charger for use with Tektronix TDS3000C Series digital phosphor oscilloscopes. Input 100-200Vac, 50/60Hz, 1.0AOutput 30W, 18Vdc, 1.67A (current limited)Operating temperature +5 to +50°C (+41 to +122°F)Maximum operating altitude 3000m. Operating humidity 10% to 80%.
Mikro. Elektronika has designed a range of boards ...
Description:
Mikro. Elektronika has designed a range of boards to add new functions and enhance the development of your applications using the mikroBUS™ pinout standard socket. All in one click!Click™ boards can add a range of sensing, Bluetooth, Wi-Fi, extra memory, ...