Sensitec CDK4006ABC-KA Magnetoresistive Current Sensor for CDK4006

  • RS Stock No. 763-9734
  • Mfr. Part No. CDK4006ABC-KA
  • Manufacturer Sensitec
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

CDK400 Series Demo Boards

The CDK400 demo boards are designed to demonstrate the CDS4000 series magnetoresistive current sensors, quickly and easily. When using the CDK400 boards, you are able to understand the features and the benefits of these devices.
CDS4000 current sensors are compact devices designed for accurate current measurement. They utilise magnetoresistive technology enabling a dynamic response of less than 1 μ.

Features and Benefits
User-friendly
Single 5 V power supply
Voltage regulator up to 12 V power supply
Adjustable overcurrent detection
Up to 150 A nominal current

Product Applications
The boards are ideal for industrial applications for example, solar power converters, AC variable speed drives and switched mode power supplies

Note

For use under laboratory conditions.

Magnetoresistive Sensors, Sensitec

Specifications
Attribute Value
Power Management Function Magnetoresistive Current Sensor
Kit Classification Development Board
Featured Device CDK4006
Discontinued product
Related Products
The Secure AVR® BLE IoT Node incorporates an ...
Description:
The Secure AVR® BLE IoT Node incorporates an ATtiny1617 microcontroller, a fully-certified RN4871 Bluetooth® 4.2 Low Energy module, an ATECC508A Crypto. Authentication device and a 3-axis accelerometer with temperature sensor to demonstrate a complete solution for a typical IoT end ...
The STEVAL-ESC001V1 is an electronic speed controller (ESC) ...
Description:
The STEVAL-ESC001V1 is an electronic speed controller (ESC) board for a three-phase Brushless motor (BLDC/PMSM). It demonstrates a sensorless FOC algorithm with speed regulation and active braking. The board is designed to provide fast and efficient propulsion for remote control ...
The STEVAL-SPIN3201 board is a three-phase Brushless DC ...
Description:
The STEVAL-SPIN3201 board is a three-phase Brushless DC motor (BLDC) driver board based on the STSPIN32F0 motor controller with embedded STM32F0 MCU. The board is designed for sensored or sensorless vector control, FOC algorithms with 3-shunt sensing. • 48MHz STM32 ...
The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC ...
Description:
The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC (BLDC) motor driver expansion board based on the STSPIN230 triple half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in ...