RS PRO Pressure Reducing Valve, 15 mm Compression

  • RS Stock No. 431-8888
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): IT
Product Details

Pressure Reducing Valve - BSP Female

To avoid noise in long runs of pipework and equipment it is desirable to maintain the flow rate less than two litres per second
Suitable for use with water or compressed air
Can be installed in any position and serviced in situ
Single piece acetal resin cartridge
Preset pressure
40°C maximum operating temperature

Note

To facilitate maintenance it is recommended that isolation valves are fitted before and after the pressure reducing valve.
No Gauge port

//media.rs-online.com/t_line/L761345-01.gif
//media.rs-online.com/t_line/L761351-01.gif
Specifications
Attribute Value
Connection 15 mm Compression
Minimum Outlet Pressure 1bar
Maximum Outlet Pressure 6bar
Body Material Chrome Plated Brass
Maximum Flow Rate 2L/s
Connection Size 15mm
Thread Standard or Connection Type Compression
Outlet Pressure Range 1 → 6bar
Stock check temporarily unavailable - call for stock availability
Price (ex. GST) Each
$ 105.93
(exc. GST)
$ 121.82
(inc. GST)
units
Per unit
1 +
$105.93
Related Products
Several governmental authorities recommend use of special alloys ...
Description:
Several governmental authorities recommend use of special alloys for valves handling water in areas where there is a problem of dezincification. RuB DZR valves are designed to meet such requirements. By using new technology these valves retain the reliability and ...
WRC approved. Brass chromium plated reduced bore ball ...
Description:
WRC approved. Brass chromium plated reduced bore ball valves manufactured to BS6675Used for isolating hot or cold water systems, to carry out repairs or replacements, without affecting the rest of the system and without having to drain down large volumes ...
Pressure reducing valve factory set at 3 bar. ...
Description:
Pressure reducing valve factory set at 3 bar. The setting is adjustable between 1,5 and 4 bar. Controllable check valve approved. Easy mounting.Respect for standards.Competitive price.Reduced weight and dimension.3 times less time to install.Simple construction ensuring reliability and longevity.
WRAS approved hydraulic water management devices that comply ...
Description:
WRAS approved hydraulic water management devices that comply with Bylaw 82 and 83Standard (STD), low pressure (LP) and high sensitivity low pressure (HSLP) types. Replace trickle - cock in the supply pipe to the cistern. Work by detecting slight changes ...