Raspberry Pi Compute Module 3 (CM3) I/O Interface Adapter Board

  • RS Stock No. 123-2013
  • Mfr. Part No. Compute module 3 I/O
  • Manufacturer Raspberry Pi
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Raspberry Pi Compute Module 3 IO Board

The Compute Module IO Board V3 is designed for use with the Raspberry Pi Compute Modules:
• CM1 (826-8825)
• CM3 (123-2011)
• CM3L (123-2012)

This I/O breakout board plugs onto the Compute Module to provide access to various ports that you would see on the traditional Raspberry Pi boards.

Why do I need one?
You can use the CM3 I/O board as an adapter to get your Compute Module set up. The Compute Modules themselves do not have connectors on board, they are designed to be embedded into applications.
That’s where the CM3 I/O board comes in handy. It has all of the things that are harder to add, all on the board already. There is also the ability to add additional components if and when you need them.

What is on the CM3 I/O Board?
20 GPIO pins
HDMI port
USB port
2 x camera ports
2 x display ports.

Note

Raspberry Pi guarantee the availability of CM3 and CM3 Lite until at least January 2023.

Contents

IO Board only.

Specifications
Attribute Value
Classification Adapter Board
Kit Name Compute Module 3 (CM3) I/O
Technology Interface
30 : Next working day
993 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 183.89
(exc. GST)
$ 211.47
(inc. GST)
units
Per unit
1 +
$183.89
Related Products
This board demonstrates the performance of Microchip’s MCP6N11 ...
Description:
This board demonstrates the performance of Microchip’s MCP6N11 instrumentation amplifier (INA) and a traditional three op amp INA using Microchip’s MCP6V26 and MCP6V27 auto-zeroed op amps. The input signal comes from an RTD temperature sensor in a Wheatstone bridge. Real ...
The 4D Systems MOTG (Modules on the Go) ...
Description:
The 4D Systems MOTG (Modules on the Go) product family provides an innovative plug and play solution for adding key functionalities to 4D Systems gen4 LCD Display Modules.Utilising a modular concept, the MOTG range provides a simple method for swift ...
Grove - OLED Display 0.96"is an OLED monochrome ...
Description:
Grove - OLED Display 0.96"is an OLED monochrome 128´64dot matrix display module with Grove 4pin I2C Interface .The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low ...
The Pmod JSTK2 is a two-axis joystick with ...
Description:
The Pmod JSTK2 is a two-axis joystick with a centre button, a trigger button and a programmable RGB LED. • Factory-calibrated 2-axis resistive joystick• Centre joystick pushbutton• Trigger-style pushbutton• Maximum joystick angle: 25° with 10-bit resolution on each axis• 24-bit ...