ADAFRUIT GEMMA Wearable Starter Kit 1657

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Adafruit GEMMA Wearable Platform v2 Starter Pack

The starter pack includes everything you need to add a bit of LED sparkle to your clothing. It has a set of alligator clips to test your design and the conductive thread to sew into your clothing.

The GEMMA Starter Pack includes:

- Adafruit GEMMA V2 - Miniature wearable electronic platform (RS 124-5508)
- Four FLORA RGB NeoPixels V2
- 2 x 2032 coin cell battery holder with JST connector and On/Off switch (6 V output) (batteries not included) (RS 866-0672)
- Thin conductive stainless steel thread - 2 ply, 25 meter (85 feet)
- Needle set with 20 pieces
- Small alligator clip test leads (set of 12)
- USB cable – USB A to Micro B – 90 cm (3 feet)

Adafruit GEMMA Wearable Platform v2

GEMMA is a tiny wearable platform built on a round 1.1 inch (2.8 cm) diameter board. The microcontroller at the heart of GEMMA is the Atmel Attiny85 8-bit MCU and is programmable with an Arduino IDE over USB.

This, the second generation of GEMMA, is physically and code-wise identical to the original but now has a Micro-B USB connector and an On-Off switch. It was designed mainly for wearable applications but its small size and low cost makes it great for a wide range of portable projects.

The Attiny85 processor has 8K of flash and 5 I/O pins, including analogue inputs and PWM outputs. There is a USB bootloader available from Adafruit.com but although you can program GEMMA using the Arduino IDE, it is not fully 100% Arduino compatible.

Adafruit GEMMA Wearable Platform

Specifications
Attribute Value
Classification Starter Kit
Kit Name GEMMA
Technology Wearable
10 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 42.04
(exc. GST)
$ 48.35
(inc. GST)
units
Per unit
1 - 4
$42.04
5 - 9
$40.78
10 +
$39.96
Related Products
EVAL-TDA7803AFW and EVAL-TDA7803APSO are evaluation boards for automotive ...
Description:
EVAL-TDA7803AFW and EVAL-TDA7803APSO are evaluation boards for automotive digital intelligent power amplifiers TDA7803A and TDA7808, respectively in FW and PSO packages. Digital input, Analogue output. Four audio channelsI2S bus with I2S and TDM compatibilityI2C bus. Full diagnostic. Compatible with Flexiwatt27 ...
Microchip ATMEL-ICE is a development tool designed for ...
Description:
Microchip ATMEL-ICE is a development tool designed for debugging and programming microcontrollers (MCUs). It is used with SAM and AVR microcontrollers, with ARM Cortex-M core, which has on-chip debug capability. Atmel-ICE unit USB cable (1.8m, high-speed, Micro-B) DC flat cable ...
The P-NUCLEO-6180X1 is an evaluation pack that provides ...
Description:
The P-NUCLEO-6180X1 is an evaluation pack that provides an introduction to the proximity, ranging and light sensing capabilities of the VL6180X sensor, combined with the powerful STM32F401RE microcontroller.The expansion board features the VL6180X, a Proximity sensor, gesture and Ambient Light ...
The NCV74300V1GEVK is an evaluation board for single-chip ...
Description:
The NCV74300V1GEVK is an evaluation board for single-chip RGB driver NCV7430, intended for dedicated multicolour LED applications. The RGB LED driver contains a LIN interface (slave) for parametric programming of LED colour and intensity. The device receives instructions through the ...