Raspberry Pi Compute Module 3 (CM3) SBC Development Kit

  • RS Stock No. 127-0226
  • Mfr. Part No. CM3 Dev Kit
  • Manufacturer Raspberry Pi
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Raspberry Pi Compute Module (CM3) Development Kit

The Compute Module 3 Development Kit is for designers who like the Raspberry Pi 3 functionality but need a smaller form factor for their embedded designs.

What’s included?
• 1 x Raspberry Pi Compute Module 3 (CM3) - (123-2011)
• 1 x Raspberry Pi I/O Board V3 - (123-2013)
• 1 x Raspberry Pi White Power Supply (909-8126)

The Raspberry Pi CM3 Development Kit contains everything you need to get up and running with the CM3. The board itself, the I/O board for providing power and setting up, and the power supply to connect it to the power.
The CM3 Compute Module requires some work to get started. This kit is designed to make it a little easier.

What is the Raspberry Pi Compute Module 3 (CM3)?
The Raspberry Pi Compute Module is the perfect solution to embed Raspberry Pi functionality into your industrial design. It has a smaller form factor and reduced on-board components to the traditional Raspberry Pi boards.
The CM3 features the Broadcom BCM2837 SoC with a CPU speed of 1.2 GHz and a memory capacity of 1GB. The CM3 also features a 4GB eMMC Flash which is comparable to the SD card available on other Raspberry Pi boards.

What is the Raspberry Pi Compute Module I/O Board V3?
The I/O board is required to make developing the CM3 simpler. It’s an open-source add-on board which you plug into the Compute Module 3. It features 120 GPIO pins, HDMI, USB, camera and display connectivity ports. There is also the opportunity to add your own additional components to the board.

The Power Supply
This particular PSU is the Official microUSB Raspberry Pi Power Supply Unit. This white PSU comes with interchangeable plug adapters, so it can be used with UK, Europe, Australia and USA plugs. It’s a 2.5A, 5.1V power supply, with a 1.5m cable.

Note

Raspberry Pi guarantee the availability of CM3 and CM3 Lite until at least January 2023.

The supplied power supply is for Pi 3 use only.

Specifications
Attribute Value
Classification Development Kit
Kit Name Compute Module 3 (CM3)
Technology SBC
Processor Part Number BCM2837
Processor Type MPU
840 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 213.00
(exc. GST)
$ 244.95
(inc. GST)
units
Per unit
1 +
$213.00
Related Products
The Creator Ci40 board from Imagination Technologies is ...
Description:
The Creator Ci40 board from Imagination Technologies is a high-performance, low-power microcomputer optimised for IoT applications. The Creator Ci40 is compatible with a wide range of GNU/Linux OS distributions, including Open. Wrt, Debian and Brillo – the IoT-optimised operating system ...
The RX71M Microcontroller Starter Kit is available in ...
Description:
The RX71M Microcontroller Starter Kit is available in two versions differing only in the IDE tool supported: CS+ or Eclipse Embedded (e²studio). The kit contains a Pmod™ compatible LCD module and an E1 Emulator pod for debugging purposes. 240MHz R5F571MLCDFC ...
1 x Raspberry Pi 3 Model B+ (137-3331) ...
Description:
1 x Raspberry Pi 3 Model B+ (137-3331) 1 x Black Case (167-7046). Processor: Broadcom BCM2837 Processor Quad core A53 (ARM v8) 64-bit SoCMemory: 1GB LPDDR2 SDRAM Bluetooth: Cypress BLE chip 2.4Ghz/5.0GHz IEEE 802.11ac. Ethernet: Gigabit Ethernet over USB 2.0 ...
x. Chips are a rapid electronics development ecosystem ...
Description:
x. Chips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on ...