ATMEL-ICE PCBA KIT,ATATMEL-ICE-PCBA

  • RS Stock No. 130-6124
  • Mfr. Part No. ATATMEL-ICE-PCBA
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

ATATMEL-ICE PCBA

The Atmel-ICE series consists of development tools for debugging and programming ARM Cortex-M based Atmel SAM and Atmel AVR microcontrollers with on-chip debug capability. The Atmel-ICE series supports JTAG, SWD, PDI, TPI, aWire, SPI and debugWIRE interfaces and is compatible with Atmel Studio.

Kit Contains:

Atmel-ICE unit without plastic encapsulation130-6122 Full Kit available130-6123 Basic Kit available

System Requirements

The Atmel-ICE unit requires that a front-end debugging environment Atmel Studio version 6.2 or later is installed on your computer. The Atmel-ICE should be connected to the host computer using the USB cable provided, or a certified Micro-USB cable.

How to turn the Atmel - ICE on?The Atmel-ICE is powered by the USB bus voltage. It requires less than 100mA to operate, and can, therefore, be powered through a USB hub. The power LED will illuminate when the unit is plugged in. When not connected in an active programming or debugging session, the unit will enter low-power consumption mode to preserve your computer's battery. The Atmel-ICE cannot be powered down - it should be unplugged when not in use. How does it connect?The Atmel-ICE communicates primarily using a standard HID interface and does not require a special driver on the host computer. The Atmel-ICE must be connected to an available USB port on the host computer using the USB cable provided, or suitable USB certified micro cable. The Atmel-ICE contains a USB 2.0 compliant controller and can operate in both full-speed and high-speed modes. For best results, connect the Atmel-ICE directly to a USB 2.0 compliant high-speed hub on the host computer using the cable provided.

Kit Types:

Cable kit: 177-9591Adapter kit: 177-9590Basic kit: 130-6123PCBA kit: 130-6124Full kit: 130-6122

9 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 87.76
(exc. GST)
$ 100.92
(inc. GST)
units
Per unit
1 +
$87.76
Related Products
Low voltage heat shrink cable joint kits that ...
Description:
Low voltage heat shrink cable joint kits that are suitable for connecting universal unarmoured plastic cables and pipes manufactured from PVC, PE and VPE. The tubing voltage range is 0.6/1 kV and is manufactured from cross linked Polyolefin, with a ...
The Fleximark Acid-Proof system is mainly intended for ...
Description:
The Fleximark Acid-Proof system is mainly intended for sure, long lasting marking of cables and components in electronic equipment and installations with high temperatures and in environments where traditional plastic labelling does not meet the demands. Other areas of use ...
The Fleximark Acid-Proof system is mainly intended for ...
Description:
The Fleximark Acid-Proof system is mainly intended for sure, long lasting marking of cables and components in electronic equipment and installations with high temperatures and in environments where traditional plastic labelling does not meet the demands. Other areas of use ...
The Hellermann. Tyton Rite. On Marker starter kit ...
Description:
The Hellermann. Tyton Rite. On Marker starter kit contains a reel of self-laminating labels in a reusable high-impact plastic dispenser that resists oils and grease, and includes a pen. The dispenser can be held easily in palm of hand to ...