Camloc by Alcoa M12 x 1.75 Threaded Insert Hand Tool

  • RS Stock No. 668-4724
  • Mfr. Part No. KRTM12-02
  • Manufacturer Keenserts
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Keenserts Inserts


The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.

Drilling and tapping can be done without any specialist equipment, just standard drills and taps.

Manufactured from stainless steel
Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials
In thread repair use, the defect thread can be replaced with the same nominal diameter
Significantly increases load capability in weaker materials
Special keys lock the Keensert into place eliminating rotation
Easy to install no special taps required and no tangs to remove
High resistance to torque out and pull out
Camloc Inserts & Tools available in lightweight & heavy duty versions

KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711

The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.
Drilling and tapping can be done without any specialist equipment, just standard drills and taps.
For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

Specifications
Attribute Value
Thread Size Range M12 x 1.75
1 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 201.65
(exc. GST)
$ 231.90
(inc. GST)
units
Per unit
1 +
$201.65
Related Products
HELICOIL® plus for recovery and repair of a ...
Description:
HELICOIL® plus for recovery and repair of a damaged thread.HELICOIL® plus is flexible and can be fitted wherever a screw may be placed.Set supplied with: different lengths and dimensions of HELICOIL® plus threaded inserts, drill bits, HSS manual threads, manual ...
Gear. Wrench Tap and Die Sets enable the ...
Description:
Gear. Wrench Tap and Die Sets enable the individual to be more productive due to a reversing lever with a 5° ratcheting arc. This provides a quick change from forward to reverse action eliminating hand-over-hand turning. The handle gives a ...
HSS Straight Flute hand tap for producing metric ...
Description:
HSS Straight Flute hand tap for producing metric coarse threads in most materials. Suitable for tapping repeatable tolerance threads in through or blind holes by hand or machine7° cutting rake angle. Bright finish.
A range of manual fine metric thread HSS ...
Description:
A range of manual fine metric thread HSS taps offered in a 2-part set (roughing and finishing).Each set consists of a roughing tap bit which has a five-thread entry and the finisher has two. The tap bit tolerance class is ...