Tektronix A622 Current Probe & Clamp
- RS Stock No. 851-224
- Mfr. Part No. A622
- Manufacturer Tektronix
TekScope Accessories A621 & A622
Tektronix accessories include the industrial-style clamp-on current probes A621 ( 851-218 ) and A622 ( 851-224 ) which have mV outputs and enable current waveform measurements on all TekScopes.
Tektronix Current Probe & Clamp
The Tektronix ’long nose’ style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. Equipped with a BNC connector, it can be used with a shrouded banana plug adapter*1. It can also be used on digital multimeters, TekMeter, and scopes. This device can measure AC/DC currents from 50mA to 100A peak over a frequency range of DC to 100kHz. It provides 10mV or 100mV output for each Amp measured.
Features and Benefits
• For DMMs and oscilloscopes
• Safety category voltage is 600V
Applications
• Motor drives
• Inverters
• Power supplies
• Avionics
Certifications
• CAT III 600V
• CAT III
| Attribute | Value |
|---|---|
| Current | 100A |
| Probe Type | AC/DC |
| Minimum Bandwidth | 0Hz |
| Maximum Bandwidth | 100kHz |
| Maximum Conductor Size | 11.8mm |
| Safety Category | CAT III 600 V |
| Safety Category Level | CAT III |
| Model Number p | A622 |
| Safety Category Voltage | 600V |
| Bandwidth | DC → 100 kHz |
