Digilent 410-194 Pmod WiFi IEEE 802.11g Module

  • RS Stock No. 134-6452
  • Mfr. Part No. 410-194
  • Manufacturer Digilent
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Pmod WiFi IEEE 802.11g WiFi module

The Pmod WiFi provides wireless communication through a Microchip MRF24WG0MA Wi-Fi™ radio transceiver module.

• IEEE 802.11g-compliant 2.4GHz ISM band RF transceiver
• OTA data rate: 2Mbps
• Range: 400m (Line of sight)
• Serialized unique MAC address
• PCB antenna
• Radio regulation certification for the US, Canada, Europe and Japan
• Host communication: SPI bus
• Follows Digilent Pmod Interface Specification Type 2A
• Dimensions: 43 x 20mm

Specifications
Attribute Value
Kit Classification Module
Kit Name Pmod WiFi IEEE 802.11g
5 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 39.95
(exc. GST)
$ 45.94
(inc. GST)
units
Per unit
1 +
$39.95
Related Products
The Pmod DA2 is a dual 12-bit Digital-to-Analogue ...
Description:
The Pmod DA2 is a dual 12-bit Digital-to-Analogue converter module featuring the Texas Instruments DAC121S101 device. • 2 x simultaneous conversion channels• Settling time: 8μs• Power down mode• Host communication: serial• 6-pin Pmod connector with GPIO interface• Dimensions: 25 x ...
XBee S2C 802.15.4 RF modules are built with ...
Description:
XBee S2C 802.15.4 RF modules are built with the Silicon Labs EM357 SoC by Digi International. The design has improved power consumption, support for over-the-air firmware updates and provides an upgrade path to Digi. Mesh or Zig. Bee mesh protocols. ...
The ATWINC3400-XSTK evaluation kit is a hardware platform ...
Description:
The ATWINC3400-XSTK evaluation kit is a hardware platform to evaluate the WINC3400-MR210CA module. The WINC3400 is an IEEE 802.11 b/g/n/BLE4.0 IoT network controller SoC. It is the ideal add-on to existing MCU solutions bringing Wi-Fi and BLE Network capabilities through ...
The Atmel ATWILC1000 is a link controller meant ...
Description:
The Atmel ATWILC1000 is a link controller meant for usage with third party TCP/IP stacks providing IEEE 802.11b/g/n Wi. Fi support in a 2.4GHz band. The firmware of the ATWILC1000 is loaded from the host MCU. This provides an easy ...