CY8CMBR3110-SX2I Cypress Semiconductor, CY8CMBR3 Capacitive Touch Sensor, 30cm, 1.71 → 5.5 V 16-Pin SOIC

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

CapSense® Touch Controllers, Cypress Semiconductor

A range of Programmable System-on-chip (PSoC®) products from Cypress Semiconductor incorporating analogue sub-systems with capacitive sensing hardware. These configurable devices include an on-board MCU and are aimed primarily at capacitive touch screen applications.

Register-configurable CapSense Express controller
No firmware development required
Patented CSD sensing algorithm
High sensitivity (0.1 pF)
Overlay thickness of up to 15 mm for glass and 5 mm for plastic
Proximity solutions
Sensitivity up to 2 fF per count
Best-in-class >100:1 SNR performance
Superior noise-immunity performance against conducted and radiated noise
Ultra-low radiated emissions
SmartSense Auto-tuning
Sets and maintains optimal sensor performance during run time
Eliminates manual tuning during development and production
Low-power CapSense
Average current consumption of 22 μA per sensor at 120-ms refresh interval
Wide parasitic capacitance (CP) range: 5–45 pF
Advanced user interface features
Liquid tolerance
User-configurable LED brightness for visual touch feedback
Up to eight high-sink current GPOs to drive LEDs
Buzzer signal output for audible touch feedback
Flanking Sensor Suppression (FSS) to eliminate false touches in closely spaced buttons
Analog voltage output
Attention line interrupt to the host to indicate any change in sensor status

Touch Screen Controllers

Specifications
Attribute Value
Sensor Type Proximity Sensor
Maximum Output Current 85mA
Maximum Output Voltage 0.6 (Low Level) V
Sensing Distance 30cm
Switching Mode Analogue
Output Type Open Drain
Mounting Type Surface Mount
Package Type SOIC
Pin Count 16
Maximum Supply Current 25 mA
Dimensions 9.98 x 3.98 x 1.47mm
Height 1.47mm
Length 9.98mm
Maximum Operating Temperature +85 °C
Width 3.98mm
Minimum Operating Supply Voltage 1.71 V
Series CY8CMBR3
Maximum Operating Supply Voltage 5.5 V
Minimum Operating Temperature -40 °C
435 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Pack of 5)
$ 3.828
(exc. GST)
$ 4.402
(inc. GST)
units
Per unit
Per Pack*
5 - 20
$3.828
$19.14
25 - 95
$3.112
$15.56
100 - 245
$2.798
$13.99
250 - 495
$2.442
$12.21
500 +
$1.83
$9.15
*price indicative
Packaging Options:
Related Products
Murata 3D MEMS industrial gyroscopes offer high performance ...
Description:
Murata 3D MEMS industrial gyroscopes offer high performance in difficult envrinoments. Sensing elements and the measuring circuitry are assembled into a pre-molded plastic dual-in-line (DIL) package, protected with silicon gel and covered with a stainless steel lid. In-built signal conditioning ...
Murata's low-g acceleration sensors include high performance digital ...
Description:
Murata's low-g acceleration sensors include high performance digital and analog accelerometers for both safety critical automotive and industrial applications. Based on 3D MEMS technology and intended for horizontal or vertical measurements. The sensing element and the measuring ASIC are assembled ...
The Texas Instruments AFE4403 analogue front-end (AFE) is ...
Description:
The Texas Instruments AFE4403 analogue front-end (AFE) is designed specifically for heart rate monitoring and pulse oximetering. It is composed of a low noise receiver channel, ADC, oscillator and dual LED driver with integrated fault detection. Connect an external microcontroller ...
The VCNL4040 is a fully integrated Proximity and ...
Description:
The VCNL4040 is a fully integrated Proximity and Ambient Light Sensor. An Infrared emitter is included in the package. I²C serial communication interface16-Bit effective resolution. Robust background light cancellation (including sunlight)Programmable interrupt function output. Operation voltage from 2.5 V to ...