Digi International XBee-Pro S2C 2.4GHz ZigBee Module for EM35x for Energy & Control Market

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

XBee-PRO ZigBee RF Module

The XBee-PRO ZigBee RF module operates in the 2.4GHz ISM Band and allows the formation of a mesh network. With its high power output and high receiver sensitivity it can provide long-range line-of-sight communication for up to 2 miles.

Carrier frequency: 2.4GHz ISM band with 15 channels
RF Power Output: +18dBm
Receiver Sensitivity: -102dBm @ 1% PER
Interference control: Direct Sequence Spread Spectrum (DSSS), Packet Retry/Acknowledgement
OTA Date Rate: up to 250kbps
Host communication: serial UART with RTS/CTS flow control, SPI
Programmable version contains an MC9S08QE32 microcontroller
Supported network topologies: Point-to-Point, Point-to-Multipoint, Peer-to-Peer & Mesh
Protocol: ZigBee PRO 2007, HA-Ready with support for binding/multicasting
AES-128 encryption
4 channel 10-bit ADC
15 x GPIO pins
Power supply: +2.1V to +3.6Vdc
Operating temperature range: -40 to +85°C
Dimensions: 22 x 34 x 3mm DIP format
Applications: Wireless sensor networks, long-range communication for the Internet of Things (IoT)

RS Product Codes
135-9737 XBP24CZ7UIS-004 Standard, U.FL antenna
135-9738 XBP24CZ7UIT-004 Standard, U.FL antenna
135-9739 XBP24CZ7WIT-004 Standard, Wire antenna
719-3803 XBP24BZ7PIT-004J Standard, PCB antenna
719-3828 XBP24BZ7PITB003J Programmable, PCB antenna
719-3812 XBP24BZ7SIT-004J Standard, RPSMA connector
719-3821 XBP24BZ7SITB003J Programmable, RPSMA connector
719-3815 XBP24BZ7UIT-004J Standard, U.FL connector
719-3825 XBP24BZ7UITB003J Programmable, U.FL connector
719-3819 XBP24BZ7WIT-004J Standard, Whip antenna
719-3834 XBP24BZ7WITB003J Programmable, Whip antenna

Note

An XBee-PRO ZigBee Development Kit is available under RS Part No. 719-3837

Approvals

FCC, C-TICK

Specifications
Attribute Value
RF Technology ZigBee
Kit Classification Module
For Use With Energy & Control Market
Featured Device EM35x
Frequency 2.4GHz
Kit Name XBee-Pro S2C
74 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 71.20
(exc. GST)
$ 81.88
(inc. GST)
units
Per unit
1 +
$71.20
Related Products
XBee S2C 802.15.4 RF modules are built with ...
Description:
XBee S2C 802.15.4 RF modules are built with the Silicon Labs EM357 SoC by Digi International. The design has improved power consumption, support for over-the-air firmware updates and provides an upgrade path to DigiMesh or ZigBee mesh protocols. Also provides ...
The Smart Plug is a WiFi-enabled mains power ...
Description:
The Smart Plug is a WiFi-enabled mains power plug that can be controlled in three ways: locally using the capacitive touch button, via a Smartphone or by using scheduled on/off timing. • SAMW25 WiFi module with WINC1500 SoC and SAMD21 ...
The ATWINC3400-XPRO evaluation kit is a hardware platform ...
Description:
The ATWINC3400-XPRO evaluation kit is a hardware platform to evaluate the WINC3400-MR210CA module. The WINC3400 is an IEEE 802.11 b/g/n/BLE4.0 IoT network controller SoC. It is the ideal add-on to existing MCU solutions bringing Wi-Fi and BLE Network capabilities through ...
The Click accessory modules plug into the MikroBUS ...
Description:
The Click accessory modules plug into the MikroBUS sockets in MikroElektronika microcontroller development boards. BEE click features a 2.4GHz IEEE 802.15.4 radio transceiver for ZigBee and MiWi protocols. MRF24J40MA IEEE 802.15.4 compliant RF transceiverData rate: 250kbps.