LPRS easyRadio ERIC9 RF Transceiver Arduino Shield for Arduino for easyRadio Modules

  • RS Stock No. 136-7694
  • Mfr. Part No. eRIC9-DUINO
  • Manufacturer LPRS
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

eRIC4 & eRIC9 easyRadio Arduino Shields

Two eRIC Arduino Shields which allow wireless communication between Arduino™ boards using proprietary LPRS easyRadio technology. This technology provides considerably greater range and lower power consumption than similar Wi-Fi or Bluetooth devices operating in the overcrowded 2.4GHz bands. An on-board 4-pin header allows connection of an external FT232 USB adapter device to configure the easyRadio module if required.
Two versions of the eRIC Arduino Shield are available:
136-7693 · eRIC4-DUINO for operation at 434MHz
136-7694 · eRIC9-DUINO for operation at 868/915MHz

• Host Arduino™ boards can send and receive (half duplex) up to 180 Bytes of data per packet
• Seamless delivery and presentation to all other hosts within range
• Typical operating range up to 200m
• Transmit, Receive, Busy and Power LED indicators
• Integral SMA antenna connector

eRIC4 & eRIC9 Transceiver features:

• CC430F5137 SoC, MSP430-core, 32KB Flash memory, 4KB RAM
• Embedded eROS Operating System
• Carrier Frequency: 433 or 868/915 MHz ISM-Band
• Max RF Output Power: eRIC4 +12dBm, eRIC9 +7dBm
• Max RF Data Rate: 500kbps
• Max Host Data Rate: 115.2kbps
• AES-128 data encryption/decryption
• Programmable User GPIO
• Communication: serial UART with RTS/CTS handshaking
• On-board temperature sensor
• Power supply: 2.4V to 6.0Vdc
• Operating Temperature Range: -40 to +85°C
• Dimensions: 15 x 20 x 2.2mm

Wireless Modules - Low Power Radio Solutions

Specifications
Attribute Value
RF Technology RF Transceiver
Kit Classification Arduino Shield
For Use With EasyRadio Modules
Featured Device Arduino
Kit Name EasyRadio eRIC9
Frequency 868 MHz, 915 MHz
11 In stock for delivery within 5 working day(s)
Price (ex. GST) 1 Box of 1
$ 71.51
(exc. GST)
$ 82.24
(inc. GST)
Box(es)
1 +
$71.51
Related Products
The SK-gen4-35DT-PI Starter Kit by 4 D Systems ...
Description:
The SK-gen4-35DT-PI Starter Kit by 4 D Systems is designed for Raspberry Pi (RS 896-8660). The Kit has a 3.5 in display module with an integrated Diablo16 smart controller it also comes with some of the hardware included. The Gen4 ...
The starter kit SK-gen4-43DT-PI from 4 D Systems ...
Description:
The starter kit SK-gen4-43DT-PI from 4 D Systems is intended for use with the Raspberry Pi (see 896-8660). The Kit offers an integrated Diablo16 graphics controller 4.3 in display module with some accessories included. The Gen4 uLCD module has a ...
The VM801P is a Graphics Display Development Kit ...
Description:
The VM801P is a Graphics Display Development Kit by FTDI chip that is designed to work alongside the FT801. It is used to develop and demonstrate the functionality of the FT801 Embedded Video Engine, EVE. The VM801P is a stand-alone ...
An Optical Pulse Sensor Evaluation board from ROHM ...
Description:
An Optical Pulse Sensor Evaluation board from ROHM intended for use with the Arduino Sensor Shield Evaluation Kit, RS 125-0453. The modular board includes the BH1790GLC optical sensor IC and suitable green LEDs allowing human pulse detection via finger contact. ...