IES GPS Arduino Shield

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

GPS Plug-in Module (Shield) for Arduino

The IES-SHIELD-GPS and IES-SHIELD-GPAM modules are highly integrated multi-channel simultaneous GPS and GLONASS positioning systems. Both modules include programmable analogue input/digital GPIO. IES-SHIELD-GPAM additionally features an on-board 3-axis accelerometer. Although both modules have an Arduino-shield format, they can also be used with a Raspberry PI SBC. Both modules feature I2C communication with the host in order to leave the serial UART [Tx/Rx] port free for other functions e.g. wireless communication.
GPS data is stored within internal registers which are updated once per second and includes:
Latitude (i.e. vertical)
Longitude (i.e. horizontal)
Altitude (metres)
Time & date (UTC)
Heading (True)
Speed (kilometres per hour)
Satellites in view
The accelerometer of the IES-SHIELD-GPAM can be used to determine inclination for mobile robot applications.
Give your Arduino or Raspberry Pi robot the ability to know where it is, how fast it’s moving and in what direction.

Arduino Shield standard form factor for simple integration into any Arduino project
Fast position acquisition with battery back-up for fast < 1s hot start and < 30s warm start
Integral low power antenna
400kHz I2C communication interface
Jumper-selectable I2C address
Jumper-selectable I2C pull-ups (Not required for Raspberry Pi)
4 x I/O pins programmable as GPIO or analogue inputs for local sensors
GPS Status LED
3-axis acceleration, pitch and roll measurement (IES-SHIELD-GPAM RS 862-5708 only)
Replaceable CR1220 lithium back-up battery
Power supply: +7V to +16Vdc from Arduino Vin pin
Operating temperature range: 0 to +70°C
Dimensions: 56.25 x 53.5 x 20mm
Applications: Mobile robot navigation, vehicle security systems

Specifications
Attribute Value
RF Technology GPS
Kit Classification Arduino Shield
9 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 163.02
(exc. GST)
$ 187.47
(inc. GST)
units
Per unit
1 +
$163.02
Related Products
This 18-channel R/C servomotor driver shield is designed ...
Description:
This 18-channel R/C servomotor driver shield is designed for the Arduino UNO microcontroller board but is compatible with all other Arduino boards and the Raspberry Pi via the high speed I²C interface. Typical applications include humanoid and multi-limbed 'walking' format ...
The CY8CKIT-042-BLE Low Energy Pioneer Kit enables customers ...
Description:
The CY8CKIT-042-BLE Low Energy Pioneer Kit enables customers to evaluate and develop Bluetooth 4.1 wireless Low Energy applications using the PSoC 4 BLE and PRoC BLE devices. • CY8C5868LTI-LP039 PSoC 5LP programmer/debugger • User RGB LED • Power and Status ...
The ARIS board is a hardware and software ...
Description:
The ARIS board is a hardware and software Renesas Synergy platform, ready-to-use on developing Internet of Things (IoT) applications. The system is built around a Renesas Synergy S7 Series high-performance microcontroller. The accelerometer sensor and the gyroscope supply the position ...
Two eRIC Arduino Shields which allow wireless communication ...
Description:
Two eRIC Arduino Shields which allow wireless communication between Arduino™ boards using proprietary LPRS easyRadio technology. This technology provides considerably greater range and lower power consumption than similar Wi-Fi or Bluetooth devices operating in the overcrowded 2.4GHz bands. An on-board ...