Preventa XPS MC Series Safety Controller, 16 Safety Inputs, 10 Safety Outputs, 24 V dc

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

XPS MC, Configurable Safety Controllers, Base Units

Configurable device capable of centralised monitoring of multiple safety functions such as E-stops, safety interlocks, magnetic safety interlocks, two hand controllers, light curtains, zero speed detection, enabling switches. Designed to provide a solution for safety applications requiring conformity to category 4 of standard EN 954-1/ISO 13849-1 and SIL 3 requirements of standard IEC 61508. Incorporates an interface for communicating with operator dialogue terminals (Magelis) or PLCs.

8 control inputs as standard
LEDs on the front face enable simple and visual diagnostics
Communication via Modbus
30 certified safety functions can be assigned to the safety outputs, these are configured using the XPS MCWIN software (see stock no 464-899)
Required safety function can be selected after receipt of the product.

Note

Stock numbers 464-946 and 464-930 are starter kits. These contain the safety controller, XPS-MCWIN configuration software, USB to 8 pin male connector cable, 8 pin female mini DIN to RJ45 cable, sub 25 way male connector to RJ45 cable, cage clamp terminal set and screw clamp terminal set
To connect XPS-MC to a PC for programming and diagnostic purposes:
Laptop PC with 9 pin serial port: use RS 382-2645 and 544-490
Laptop PC with USB port: use RS 464-962 and RS 218-080

Specifications
Attribute Value
Range Preventa
Series XPS MC
Number of Safety Inputs 16
Number of Safety Outputs 10
Safety Category 4
SIL SIL 3
Supply Voltage 24 V dc
Contact Current Rating 10 mA
IP Rating IP20
Length 151.5mm
Width 74mm
Dimensions 151.5 x 74 x 153 mm
Depth 153mm
2 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 3,076.97
(exc. GST)
$ 3,538.52
(inc. GST)
units
Per unit
1 +
$3,076.97
Related Products
The LM series from eldoLED are highly integrated, ...
Description:
The LM series from eldoLED are highly integrated, constant current driver/controllers for high-brightness LED lighting applications. The LM Series driver/controllers can be integrated in a network or used as standalone devices. eldoLED ShowMaster software allows you to upload show sequences ...
The STMPE811 is an advanced resistive touchscreen controller ...
Description:
The STMPE811 is an advanced resistive touchscreen controller with 8-bit general purpose Input/Output (GPIO) expander. 1.8 V to 3.3 V operating voltageIntegrated 4-wire touchscreen controllerInterrupt output pinWakeup feature on each I/OSPI and I²C interface.
One system covers both safety-related (E-stop, light curtain ...
Description:
One system covers both safety-related (E-stop, light curtain etc) and standard control functionsEconomical non-expandable solutionSimple wiring means short commissioning timesSimple intuitive programming resulting in time and cost savingFlexible to apply, as only one solution required for applications up to ...
The PNOZmulti Mini configurable safety relay from Pilz ...
Description:
The PNOZmulti Mini configurable safety relay from Pilz has an integral LCD display which provides status information and diagnostic messages. This safety controller has all the functions of the established PNOZmulti yet is only a space saving 45mm wide. A ...