Miller By Honeywell Front, Rear Attachment Stretchable Safety Harness

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Miller H Design 2 point Harness

The Miller H Design 2-point harness complete with mating buckles on the chest and leg straps plus 2 sternal webbing loops. This new generation harness provides you with comfort and freedom of movement providing security to workers. This harness is excellent for use within the construction and general industries. Horizontal leg straps prevent uncomfortable friction and the H architecture of the harness gives total freedom for legs and arms. There are many benefits to this harness including adjustable buckles, accessible anchor points, bended position back D-ring. Adjustable chest and leg straps ensure a remarkable versatile harness.


2 point harness
H architecture
Adjustable buckles
Adjustable leg and chest straps
Accessible anchor points
Bended position back D-ring
East front strap clip
Fall indicators
Horizontal leg straps
Long front loops
Mating buckles on chest and leg straps
Sternal webbing loops
Easy movement


Shoulder straps – water repellent, anti-stain - Breaking strength 2700 daN
Other straps – water repellent, anti-stain – Breaking strength 2700 daN
Black anchorage D-ring – steel – Breaking strength 2300 daN
Sternal anchorage point – long webbing loops
Steel mating buckles – Breaking point 900 daN


Fluo green textile
High visible stitching
Front and back fall indicators on back plate
Labels for traceability
Water repellent and stain free webbing


Building and construction
General Industry


EN 361

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:


existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

Attribute Value
Harness Attachment Point Front, Rear
Harness Size L/XL
Belt Included No Belt
Adjustable Straps Chest, Leg, Shoulder
Buckle Type Pass Through
Hi-Vis No
Reflective No
Padding None
Harness Colour Black, Green
Weight Capacity 140kg
Fastener Material Steel
3 : Next working day
17 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 100.32
(exc. GST)
$ 115.37
(inc. GST)
Per unit
1 +
Related Products
PSS Screw CS20 / ML00 17 mm Karabiner ...
PSS Screw CS20 / ML00 17 mm Karabiner is made from steel with a breaking strength of 2500 daN. FEATURES and BENEFITS:Steel. Opening 17 mm. Weight 0.165 kg. Dimensions 104 x 58 mm. Breaking strength 2500 daNTemperature range -30°C to ...
Newton Easyfit fall arrest harness keeps its shape ...
Newton Easyfit fall arrest harness keeps its shape due to a vest and fast automatic buckles, sternal and leg loop. The harness is quick and easy to put on with both feet on the ground plus offering stowage of MGO ...
Delta Comfort range of safety harnesses is tough ...
Delta Comfort range of safety harnesses is tough featuring coated corrosion resistant hardware including water and abrasion resistant webbing. The individual shape of the Comfort harness ensures that they are easy to put on and remove due to the unique ...
Petzl VOLT WIND fall arrest and work positioning ...
Petzl VOLT WIND fall arrest and work positioning harness designed for the wind power industry with the EASYFIT design. FAST automatic buckles on the leg loops and waistbelt means that you can put on the harness with your feet on ...