Detects the stop condition of all types of AC or DC motor driven machines which, when the motor runs down, produce a residual voltage in the windings. No additional sensor is required
1 N/O and 1 N/C contacts, EN954-1 Category 3 / EN 13849-1
2 solid-state outputs for signalling to PLC
4 LEDs for status signalling
Maximum motor voltage: 500Vac
2 potentiometers mounted on the front face of the module allow independent adjustment of the switching threshold for each input circuit. This allows adjustment for different types of motors and application requirements
45mm housing
Pull off terminals for a simple and quick maintenance
Standard module (stock no 464-485) is designed for frequencies up to 60Hz. For motors operating at a frequency higher than 60Hz producing a high frequency remnant voltage, stock no 464-489 should be used
Attribute | Value |
---|---|
Supply Voltage | 24 V dc |
Number of Channels | 2 |
Auxiliary Contacts | 2 |
Function | Speed/Standstill Monitoring |
Safety Contacts | 2 |
Range | Preventa |
Terminal Type | Screw |
Depth | 99mm |
Length | 120mm |
Width | 45mm |