Phoenix Contact 24 V dc Safety Relay Compatible With Safety Switch/Interlock

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Multi-application Modular System - PSR-SPP Series

This can be quickly and reliably assembled to form a tailor-made safety solution. To connect using TBUS correctly you will need one PSR-TBUS per module. For the last additional module use one PSR-TBUS-TP instead, this will close the feedback loop. The interface module is used for the connection of up to four safety sensors with NC/NO contacts to the safety relay PSR-SDC4, with screw connection.

Features and Benefits

Quick system extension up to 10 modules, offering a safety system with up to 42 contacts
Automatic identification of desired operating mode, no need to set switches or define parameters
The system is based on a master relay (PSR-SDC) that monitors e-stops, guard doors (interlock or non-contact) and optical devices (e.g. light curtains)
Safe cross-wiring with T-BUS renders the usual cross-wiring of supply voltage, enable signal and confirmation path redundant. Making commissioning and future expansion simple
24Vdc supply voltage
Semiconductor output
Depending on the wiring Safety category 2 or 4 can be maintained
One or Two channel switches are used for control
Note: The device has a rear interface for the DIN Rail connector T-BUS. Via this T-BUS interface extension devices PSR-URM4-B (undelayed contacts) and PSR-URD (drop-out delay contacts) can be controlled and monitored over one channel. These in combination form a T-BUS unit, the feedback path must be connected to the final (right hand) extension device (see datasheet for more details) or by using connection plug PSR-TBUS-TP

Note

The device has a rear interface for the DIN Rail connector T-BUS. Via this T-BUS interface extension devices PSR-URM4-B (undelayed contacts) and PSR-URD (drop-out delay contacts) can be controlled and monitored over one channel. These in combination form a T-BUS unit, the feedback path must be connected to the final (right hand) extension device (see datasheet for more details) or by using connection plug PSR-TBUS-TP.

Specifications
Attribute Value
Supply Voltage 24 V dc
Function Safety Switch/Interlock
Width 22.5mm
Depth 106mm
Length 99mm
Temporarily out of stock - back order for despatch 04/09/2020, delivery within 1 working days from despatch date.
Price (ex. GST) Each
$ 222.98
(exc. GST)
$ 256.43
(inc. GST)
units
Per unit
1 +
$222.98
Related Products
Universal Series can be used as either an ...
Description:
Universal Series can be used as either an input or an output device. Connection of sensors/actuators is via modular terminal blocks. Feather-light direct connection of conductors starting from 0.34 mm2 without tools. The connection of small cross sections from 0.14 ...
The Smartscan 1000 series 2 beam light curtain ...
Description:
The Smartscan 1000 series 2 beam light curtain has a maximum scanning range of 5m. It comprises of Transmitter (Tx) and the Receiver (Rx) units, providing two fail-safe electronic outputs. Each enclosure has integral M6 threaded slots down the sides ...
Each mini. Twin stick contains both the sender ...
Description:
Each mini. Twin stick contains both the sender and receiver elements, each symmetrically mounted in one half of a housing and separated by a central synchronisation beam. The diagram shows two identical mini. Twin units offset by 180° working as ...
Professional range of Schneider Electric safety time delay ...
Description:
Professional range of Schneider Electric safety time delay modules. The modules incorporate 2 solid-state outputs. Designed for applications with interlocking on high inertia. All models are highly reliable and excellent quality. IP40 EnclosuresIP20 Terminals2 Solid-State Outputs.