RS PRO Voltage to Voltage Signal Conditioner, Voltage 4 → 20 mA Input, 4 → 20 mA Output

  • RS Stock No. 629-500
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Signal Conditioning Units

RS Pro single or dual trip amplifiers with the facility to arrange each trip so that the alarm condition can be above (high trip) or below (low trip) the set point. The relay can be either energise/de-energise in the alarm condition (fail-safe) or de-energise/energise in the alarm condition (non-fail safe).

Dual supply voltage operation
Bi-colour LED status indication
Front panel adjustment of "Trip Levels"

Input and output stages powered from separate secondaries of the supply transformer to provide 3-port isolation
Dual supply voltage operation
LED indication of "power on"

Technical specification - Signal Conditioning Units
Relay Contact Rating 3A @ 250Vac (cosØ = 1)
1A @ 250Vac (cosØ = 1)
Trip Differential 0.5% of span

Note

Trip settings are set via links on a PBC within the unit,Signal isolators/Converters; Four units which provide signal isolation via an opto-isolated hybrid circuit. The 0-10Vdc; 4-20mA;and 4-20mA; 0-10Vdc units also convert process signals into a required standard transmission voltage or current signals

Specifications
Attribute Value
Input Type Voltage
Output Type Voltage
Signal Conditioner Type Voltage to Voltage
Input Range 4 → 20 mA
Output Range 4 → 20 mA
Supply Voltage 24 → 230 V ac
Mounting Type DIN Rail
Sensor Compatibility RTD, Thermocouple
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Termination Screw
Module Type Converter
Operating Temperature Range -20 → +60 °C
15 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 332.53
(exc. GST)
$ 382.41
(inc. GST)
units
Per unit
1 +
$332.53
Related Products
Wago 857 series JUMPFLEX configurable isolation amplifiers convert, ...
Description:
Wago 857 series JUMPFLEX configurable isolation amplifiers convert, amplify, filter and electrically isolate standard analogue signals. Clipping capability provides analogue signal limitation to output end values Calibrated scale switching PC configuration interface Safe 3 way isolation with 4 kV test ...
Wago 857 series JUMPFLEX configurable isolation amplifiers convert, ...
Description:
Wago 857 series JUMPFLEX configurable isolation amplifiers convert, amplify, filter and electrically isolate standard analogue signals. Clipping capability provides analogue signal limitation to output end values Calibrated scale switching PC configuration interface Safe 3 way isolation with 4 kV test ...
Wago 857 series JUMPFLEX loop powered RTD temperature ...
Description:
Wago 857 series JUMPFLEX loop powered RTD temperature signal conditioner records Pt100, Pt200, Pt500 and Pt1000 sensors and resistors up to 4.5 kΩ, converting the temperature signal into an analogue signal on the output side. No additional supply voltage required ...
Wago 857 series JUMPFLEX millivolt signal conditioner converts ...
Description:
Wago 857 series JUMPFLEX millivolt signal conditioner converts input millivolt signals into an analogue standard signal on the output side. PC configuration interface Switching between measurement ranges is calibrated Clipping capability allows analogue signal limitation to output end values Safe ...