Phoenix Contact MACX MCR-EX-SL-NAM-YO, Isolation Amplifier Galvanic Isolator, DC Voltage ATEX, IECEx,

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

MACX MCR-EX-SL Series Signal Conditioners

The intrinsically safe interface blocks of the MACX Analog Ex series offer the widest range of functions in the narrowest design.

Ex-i signal conditioner for many applications
Electrical 3-way isolation
Screw or spring-cage connections are available
IP20 protection
Width only 12.5 mm

Approvals

CE

Specifications
Attribute Value
Input Range 8 V dc
Output Range Maximum of 10 mA, Maximum of 9.6 V
Supply Voltage 9.6 → 30 V dc
Mounting Type DIN Rail
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Number of Channels 1
Termination Screw
Hazardous Area Certification ATEX, IECEx
Series MACX MCR-EX-SL-NAM-YO
Standards Met EN 60079-11, EN 61000-6-2, EN 61000-6-4, EN 61010-1, EN 61326, IEC 61508 to SIL 3, UL 61010
Operating Temperature Range -20 → +60 °C
3 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 287.46
(exc. GST)
$ 330.58
(inc. GST)
units
Per unit
1 +
$287.46
Related Products
This Switch can be mounted on DIN rail ...
Description:
This Switch can be mounted on DIN rail individually, or with other units. The housing is 102.5mm high by 6.2mm wide.The performance specifications are similar to standard sized MCR products. Requires a 24Vdc supply. Input, 0-20mA, 0-10VAdjustable alarm switching point ...
These isolators can be mounted on DIN rail ...
Description:
These isolators can be mounted on DIN rail individually or with other units. The housings are 102.5mm high by 6.2mm wide. The performance specifications are similar to standard sized MCR products. No separate supply voltage necessary. Single and dual channel ...
For Pt100 or thermocouples. Measurement range and output ...
Description:
For Pt100 or thermocouples. Measurement range and output signal configurable3-way isolation. Diagnostic LED for analysing faults. Power supply via feed terminal and mounting rail bus connector (stock no. 489-2825) possible. Screw or spring-loaded connector. Overall width 6.2 mm.
This signal duplicator can be mounted on DIN ...
Description:
This signal duplicator can be mounted on DIN rail individually, or with other units. The housing is 102.5mm high by 6.2mm. The performance specifications are similar to standard sized MCR products.,The inputs are listed as: 0-20mA, 4-20mA, 1-5V, 0-10V etc, ...