MTL Crouse-Hinds, Transmitter Signal Conditioner, Current 4 → 20 mA Input, ≥16.5 V, 4 → 20 mA Output

  • RS Stock No. 144-8688
  • Mfr. Part No. MTL1142
  • Manufacturer MTL
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

MTL1142 Transmitter Power Supply

MTL1142 is a 1 channel analogue input isolator with current source or current sink output. It provides HART communication for Smart two wire transmitters. The signal conditioner is DIN Rail mountable.

Features and Benefits

1 Channel, smart for 2/4 wire transmitters
Transmitters can be interrogated either from the operator station or by a hand held communicator (HHC)
Power supplied via the power bus embedded in the DIN Rail
4 to 20 mA output current source or sink, switch selectable
DIN Rail mounting

MTL Signal Conditioners

Specifications
Attribute Value
Input Range 4 → 20 mA
Output Range ≥16.5 V, 4 → 20 mA
Supply Voltage 18 → 32 V dc
Mounting Type DIN Rail
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Termination Screw
Series Crouse-Hinds
Number of Channels 1
Operating Temperature Range -20 → +60 °C
11 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 310.95
(exc. GST)
$ 357.59
(inc. GST)
units
Per unit
1 +
$310.95
Related Products
Murr. Elektronik MDW series signal converters for converting ...
Description:
Murr. Elektronik MDW series signal converters for converting a range of process signals into standard active and passive transmission current or voltage signals. Status LED Input and output galvanically separated Screw terminals 35mm DIN Rail mounting.
The MTLx525 enables an on/off device in a ...
Description:
The MTLx525 enables an on/off device in a hazardous area to be controlled by a volt-free contact or logic signal in the safe area. It can drive loads such as solenoids, alarms, LEDs and other low power devices that are ...
3-way electrical isolation24Vdc supply voltage with green LED ...
Description:
3-way electrical isolation24Vdc supply voltage with green LED indicator'Plug and play' (except stock nos. 442-8935 and 442-8777) Dimensions: H75 x W22.5 x D107mm. Operating temperature range: -20 to +80°C.
Millenium 2 Plus has been designed to automate ...
Description:
Millenium 2 Plus has been designed to automate building and smaller machine applications. Many pre-programmed standard functions are available for counting, timing, comparison, multiplexing, time based programming, etc.,Non-expandable, expandable, and application specific starter kits are also available. All ...