RS PRO Analogue to Relay Signal Conditioner, Analogue 4 - 20 mA Input

  • RS Stock No. 466-2286
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

BD100 Single Level Trip Amplifier

RS Pro single level trip amplifiers operate from a single process input, with a single trip action. This output can be arranged so that the alarm condition is triggered either above or below the defined set point. The relay can also be configured for a Fail-Safe (energised in the stable state to de-energise in the alarm state) or Non-Fail Safe (de-energised in the stable state to energise in the alarm state) operation.

1 x SPCO relay (max. 60W load) output
Adjustable set points
High and/or low trips (user-configurable)
Bi-colour LED trip status indication: Green LED indicates stable state; red LED indicates alarm state

Specifications
Attribute Value
Input Range 4 - 20 mA
Supply Voltage 115 V ac
Mounting Type DIN Rail
Minimum Operating Temperature 0°C
Maximum Operating Temperature +45°C
Operating Temperature Range 0 → +45 °C
Termination Screw
6 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 298.32
(exc. GST)
$ 343.07
(inc. GST)
units
Per unit
1 +
$298.32
Related Products
Wago 857 series JUMPFLEX configurable isolation amplifiers convert, ...
Description:
Wago 857 series JUMPFLEX configurable isolation amplifiers convert, amplify, filter and electrically isolate standard analogue signals. Clipping capability provides analogue signal limitation to output end values Calibrated scale switching PC configuration interface Safe 3 way isolation with 4 kV test ...
Wago 857 series JUMPFLEX configurable isolation amplifiers convert, ...
Description:
Wago 857 series JUMPFLEX configurable isolation amplifiers convert, amplify, filter and electrically isolate standard analogue signals. Clipping capability provides analogue signal limitation to output end values Calibrated scale switching PC configuration interface Safe 3 way isolation with 4 kV test ...
Wago 857 series JUMPFLEX millivolt signal conditioner converts ...
Description:
Wago 857 series JUMPFLEX millivolt signal conditioner converts input millivolt signals into an analogue standard signal on the output side. PC configuration interface Switching between measurement ranges is calibrated Clipping capability allows analogue signal limitation to output end values Safe ...
The MTL5582 connects to a resistance temperature device ...
Description:
The MTL5582 connects to a resistance temperature device (RTD) or other resistance located in a hazardous area, isolatesit and repeats the resistance to a monitoring system in the safe area. One channel. Connecting from 2-, 3- or 4-wire RTDs. Selection ...