RS PRO Voltage Output, Signal Conditioner

  • RS Stock No. 466-2337
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

BD300 Isolating Signal Converter

RS Pro isolating signal converters for converting a range of process signals into standard active and passive transmission current or voltage signals.

AC supply voltage
Fully isolated – Input/Supply/Output
Signals conditioned before being fed through opto-isolating circuit
Red LED power ON indicator

Specifications
Attribute Value
Input Range 4 → 20 mA
Output Range 0 → 10 V
Supply Voltage 230 V ac
Mounting Type DIN Rail
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Termination Screw
Operating Temperature Range -20 → +60 °C
5 In stock for delivery within 7 working day(s)
Price (ex. GST) Each
$ 286.09
(exc. GST)
$ 329.00
(inc. GST)
units
Per unit
1 +
$286.09
Related Products
MTL1142 is a 1 channel analogue input isolator ...
Description:
MTL1142 is a 1 channel analogue input isolator with current source or current sink output. It provides HART communication for Smart two wire transmitters. The signal conditioner is DIN Rail mountable. 1 Channel, smart for 2/4 wire transmitters. Transmitters can ...
MTL1211 is a 1 channel switch or proximity ...
Description:
MTL1211 is a 1 channel switch or proximity detector isolator that has the ability to select line fault detection or repeat output. The signal conditioner is DIN Rail mountable. 1 Channel switch/proximity detector with line fault detection. Switches are used ...
The MTLx581 takes a low-level dc signal from ...
Description:
The MTLx581 takes a low-level dc signal from a voltage source in a hazardous area, isolates it, and passes it to a receiving instrument located in the safe area. The module is intended for use with thermocouples utilising external cold-junction ...
The MTLx525 enables an on/off device in a ...
Description:
The MTLx525 enables an on/off device in a hazardous area to be controlled by a volt-free contact or logic signal in the safe area. It can drive loads such as solenoids, alarms, LEDs and other low power devices that are ...