RS PRO Analogue → Relay Signal Conditioner, Analogue

  • RS Stock No. 466-2400
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

BD120 Dual Level Trip Amplifier

RS Pro dual level trip amplifiers operate from a single process input, with a dual trip action. This output can be arranged so that the alarm condition is triggered either above or below the defined set point. The relay can also be configured for a Fail-Safe (energised in the stable state to de-energise in the alarm state) or Non-Fail Safe (de-energised in the stable state to energise in the alarm state) operation.

2 x SPCO relay (max. 60W load) output
High trip/low trip (user-configurable); fail-safe design (HLFS)
Adjustable set points
Bi-colour LED trip status indication: Green LED indicates stable state; red LED indicates alarm state

Specifications
Attribute Value
Input Type Analogue
Output Type Relay
Signal Conditioner Type Analogue → Relay
Input Range -250 → +250 V dc, 0 → 20 mA, 0 → 250 V ac
Supply Voltage 230 V ac
Mounting Type DIN Rail
Sensor Compatibility RTD, Thermocouple
Minimum Operating Temperature 0°C
Maximum Operating Temperature +45°C
Module Type Amplifier
Operating Temperature Range 0 → +45 °C
Termination Screw
On back order for despatch 17/12/2019, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 316.59
(exc. GST)
$ 364.08
(inc. GST)
units
Per unit
1 +
$316.59
Related Products
The MTL5582 connects to a resistance temperature device ...
Description:
The MTL5582 connects to a resistance temperature device (RTD) or other resistance located in a hazardous area, isolatesit and repeats the resistance to a monitoring system in the safe area. One channel. Connecting from 2-, 3- or 4-wire RTDs. Selection ...
Symmetric DIN rail mounting units with finger protected ...
Description:
Symmetric DIN rail mounting units with finger protected terminals designed for use in process control and instrumentation applications. Single or dual level trip amplifiers from a single Input.Each trip can be arranged so that the alarm condition can be above ...
Single channel signal processors for use with insertion ...
Description:
Single channel signal processors for use with insertion flow sensors that do not have internal control logic options available with digital or analogue output. Finger protectionLED indication of flow conditions. Simple switch point set up using potentiometers500Ω load (max.)PNP Output8-pole, ...
PNP/NPN and NAMUR input in 5 ranges. Output ...
Description:
PNP/NPN and NAMUR input in 5 ranges. Output selectable by terminals. Offset and gain adjustable by ±5%LED indication when input is >5% of set range. Galvanically isolated supply/output.