TE Connectivity Transparent Solder Sleeve 1.8 → 4.5mm

Technical data sheets
Legislation and Compliance
Non Compliant
COO (Country of Origin): MX
Product Details

CWT 38 braided cable terminals

These terminals allow earth tags to be created on shielded cables.
Compatible with numerous dielectric and insulating materials, even those that are heat-sensitive.
The solder connections are insulated, protected and highly resistant to mechanical stress due to the combined use of a fluxed solder ring and a heatshrink sleeve.
Quick and easy-to-use: simply place the terminal and the wire together and heat them using a hot air gun.
The clear sleeve facilitates connection quality control.
These terminals are available with (W1) or without pre-installed earth wire. The 22 AWG multistrand wire is white.

//media.rs-online.com/t_line/LF180828-10.gif
Specifications
Attribute Value
Minimum Cable Diameter 1.8mm
Maximum Cable Diameter 4.5mm
Sleeve Length 42mm
Material Polyolefin
Minimum Operating Temperature -55°C
Maximum Operating Temperature +125°C
Colour Transparent
On back order for despatch 05/10/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each (In a Pack of 10)
$ 1.749
(exc. GST)
$ 2.011
(inc. GST)
units
Per unit
Per Pack*
10 - 140
$1.749
$17.49
150 - 490
$1.699
$16.99
500 +
$1.646
$16.46
*price indicative
Related Products
B-050 solder sleeves are a controlled soldering device ...
Description:
B-050 solder sleeves are a controlled soldering device terminating ground wires of an electrical cable to tin-plated or bare copper with an insulation rate of +105°C or higher.
A one piece soldering system for jointing signal ...
Description:
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed ...
Solder sleeve shield connectors provide a fast, reliable ...
Description:
Solder sleeve shield connectors provide a fast, reliable method of grounding leads to cable shields. The solder sleeve assembly contains a precisely engineered preform of flux solder inside a transparent heatshrinkable insulation sleeve with sealing rings. This provides environmentally sealed ...
The Solder Sleeve introduction kit contains various solder ...
Description:
The Solder Sleeve introduction kit contains various solder sleeves suitable for terminating a wide range of cable and wire constructions from 0.9mm to 15.1mm. Solder Sleeves provide insulated, environmentally sealed; strain-relieved soldered connections. Temperature range -55°C to +125°CTerminate bare or ...