Asco Solenoid Valve E210D004SCD2, 2 port , NC, 24 V dc, 1in

  • RS Stock No. 488-784
  • Mfr. Part No. E210D004SCD2
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Two-Way, Pilot Operated, Minimum Pressure, N/C Valves

Two-way, pilot operated solenoid valves, minimum operating pressure required, normally closed with threaded port connection.

Brass body
Minimum operating pressure required
Compact & lightweight
DIN plug connection
Ranging from -20 to +85°C
Can be mounted in any position

Note

Pressure ranges are for water and may differ for other media.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 24 V dc
Number of Ports 2
Operation Pilot
Connection 1 in Rp Female
Connection Size 1in
Default Valve Position NC
Suitable Applications Air, Inert Gas, Oil, Water
Type 2/2
Orifice Diameter 25mm
Body Material Brass
Maximum Working Pressure 9 bar
Operating Temperature Range -20 → +75 °C
Minimum Operating Temperature -20°C
Maximum Operating Temperature +75°C
Series 210
Maximum Opening Time 120ms
Maximum Closing Time 120ms
Flow Factor Kv 11.1m³/h
Thread Standard or Connection Type Rp
Connection Gender Female
On back order for despatch 07/12/2020, delivery within 7 working days from despatch date.
Price (ex. GST) Each
$ 676.92
(exc. GST)
$ 778.46
(inc. GST)
units
Per unit
1 +
$676.92
Related Products
The Type 5282 Burkert solenoid valve is specially ...
Description:
The Type 5282 Burkert solenoid valve is specially characterised by its design in which there is fluid separation by the inclusion of a diaphragm seal in the pilot valve. This enables the coil to remain protected from the effects of ...
Diaphragm valves for partially aggressive gaseous and liquid ...
Description:
Diaphragm valves for partially aggressive gaseous and liquid media. Suitable for vacuum. For systems with low or fluctuating pressure conditions. Defined flow direction. Valve works without minimum pressure differential. Electromagnetically actuated. With forced lift. Closing damping. Without tool, interchangeable ...
Parker 2-way solenoid valves are used in a ...
Description:
Parker 2-way solenoid valves are used in a wide variety of applications with or without pressure differential. Ideally suited for air, liquids and gases, these valves are available with a brass or stainless steel body. Compressors. Water dispensing & purification. ...
Compact solenoid valves suitable for most gas and ...
Description:
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves ...