RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.
 
MPN

Asco Solenoid Valve SCXH262C022BW.230/50.19610, 2 port , NC, 230 V ac, 15mm


Temporarily out of stock - back order for despatch when stock is available
Add to Basket

Price (ex. GST) Each

$199.37

(exc. GST)

$229.28

(inc. GST)

units

Added

RS Stock No.:
488-895
Mfr. Part No.:
SCXH262C022BW.230/50.19610
Manufacturer:
Asco

RoHS Status: Not Applicable

COO (Country of Origin):
GB
unitsPer unit
1 - 5$199.37
6 - 11$196.50
12 +$195.23

Two-way, WRAS, N/C Water Valves


Two-way, brass-bodied WRAS listed solenoid valves with anti-water hammer devices fitted as standard. They have a zero bar minimum operating pressure and are normally closed. The compact, lightweight unit may be mounted in any position (however, for optimum life, certain models will work best when the solenoid coil is mounted vertically and upright). Series 238 solenoid valves incorporate "G" (BSP Parallel) threaded ports, while Series 262 solenoid valves offer 15mm compression fitting connection ports. The moulded electrical spade connection is based on ISO 4400/EN 175301-803, form A specifications and a DIN 43650 connector is supplied as standard.


Standards

UK WFBS listed

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

AttributeValue
Supply Voltage230 V ac
Number of Ports2
Connection15 mm Compression Female
Connection Size15mm
Default Valve PositionNC
Suitable ApplicationsWater
Type2/2
Orifice Diameter3.2mm
Body MaterialBrass
Maximum Working Pressure11 bar
Connection GenderFemale
Series262
Thread Standard or Connection TypeCompression