Asco Solenoid Valve E222B004SCA2, 2 port , NC, 24 V ac, 1in

  • RS Stock No. 488-930
  • Mfr. Part No. SCE222B004.24/50
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Two Way, N/C Steam Valves

Two-way, pilot operated solenoid valves for hot water/steam applications, normally closed with threaded port connection.

Brass body
Compact design to minimize heat radiation loss
DIN plug connection
Ranging from -20 to +184°C
Can be mounted in any position

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 24 V ac
Number of Ports 2
Operation Pilot
Connection 1 in Rp Female
Connection Size 1in
Default Valve Position NC
Suitable Applications Hot Water, Steam
Type 2/2
Orifice Diameter 25mm
Body Material Brass
Maximum Working Pressure 9 bar
Operating Temperature Range -20 +40 °C
Minimum Operating Temperature -20°C
Maximum Operating Temperature +40°C
Thread Standard or Connection Type Rp
Flow Factor Kv 12m³/h
Connection Gender Female
Maximum Opening Time 1000ms
Series 222
Maximum Closing Time 1000ms
1 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 1,360.19
(exc. GST)
$ 1,564.22
(inc. GST)
units
Per unit
1 +
$1,360.19
Related Products
Two-way, direct operated, EN161 approved solenoid valves for ...
Description:
Two-way, direct operated, EN161 approved solenoid valves for use on gas pilot and gas burner control, zero bar minimum operating pressure, normally closed, threaded port connection. Pressure not required for operation. Compact & lightweightISO 4400 DIN connection. Class A, group ...
Diaphragm valves for partially aggressive gaseous and liquid ...
Description:
Diaphragm valves for partially aggressive gaseous and liquid media. Suitable for vacuum. For systems with low or fluctuating pressure conditions. Defined flow direction. Valve works without minimum pressure differential. Electromagnetically actuated. With forced lift. Closing damping. Without tool, interchangeable ...
Parker 2-way solenoid valves are used in a ...
Description:
Parker 2-way solenoid valves are used in a wide variety of applications with or without pressure differential. Ideally suited for air, liquids and gases, these valves are available with a brass or stainless steel body. Compressors. Water dispensing & purification. ...
Compact solenoid valves suitable for most gas and ...
Description:
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves ...