Burkert Solenoid Valve 125339, 3 port , NC, 230 V ac, 1/8in

  • RS Stock No. 306-9844
  • Mfr. Part No. 125339
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

6014 General Purpose Solenoid Valve

Brass bodied, normally closed solenoid valves.

Coil changed easily with valve in place
Two female ports and a 1/8 in. male vent port
Coil can be locked in four by 90° positions or move free between, as required
Brass body and FKM high quality seal material
Epoxy encapsulated coil
Fluid temperature range: -10 to +90°C
Suitable for use with water, neutral fluids air natural, gases, oil and fats (without additives)
Maximum viscosity: 21mm2/s
Operating temperature: –10 to +100°C max.
Power consumption: 21VA (a.c. in rush), 12VA/8W (constant) 8W (d.c.)
Protection to IP65 with cable plug DIN43650C

//media.rs-online.com/t_line/L439004-03.gif

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Specifications
Attribute Value
Supply Voltage 230 V ac
Number of Ports 3
Operation Direct
Connection 1/8 in G Female
Connection Size 1/8in
Default Valve Position NC
Suitable Applications Gas, Liquid
Type 3/2
Orifice Diameter 2mm
Body Material Brass
Maximum Working Pressure 10 bar
Operating Temperature Range -10 → +55 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Flow Factor Kv 0.11m³/h
Connection Gender Female
Maximum Opening Time 15ms
Maximum Closing Time 20ms
Thread Standard or Connection Type G
Series 6014
4 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 155.87
(exc. GST)
$ 179.25
(inc. GST)
units
Per unit
1 - 4
$155.87
5 - 9
$152.13
10 +
$149.25
Related Products
Internal timers can be adjusted after the supply ...
Description:
Internal timers can be adjusted after the supply is isolated without removing the unit. Robust polyamide construction to DIN 43650For controlling RS solenoid valves and others with the same type of termination. Protected to IP65User programmable via built-in DIP switches ...
Compact solenoid valves suitable for most gas and ...
Description:
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves ...
Compact solenoid valves suitable for most gas and ...
Description:
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves ...
The SMC VX3000 series is a direct acting, ...
Description:
The SMC VX3000 series is a direct acting, 3 port solenoid valve. Suited to various applications such as air, oil, water and steam. Valves are easily replaced without changing existing piping. DIN electrical connection. Class B & Class H coil ...