Burkert Solenoid Valve 125336, 3 port , NC, 230 V ac, 1/8in

  • RS Stock No. 307-5366
  • Mfr. Part No. 125336
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

3//2 NF direct control threaded connection solenoid valves, series 6014

Range of solenoid valves 3//2 NF A output, except 439-032 (Function C), with exhaust when off, for neutral liquids up to +100°C.
The solenoid can be positioned freely or locked in 4 positions at 90° intervals.
Able to change the solenoid without removing the valve.
High quality FPM (Viton) sealing material as standard.
DIN 43 650A connector.
Brass body.

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Specifications
Attribute Value
Supply Voltage 230 V ac
Number of Ports 3
Operation Direct
Connection 1/8 in G Female
Connection Size 1/8in
Default Valve Position NC
Suitable Applications Gas, Liquid
Type 3/2
Orifice Diameter 2mm
Body Material Brass
Maximum Working Pressure 10 bar
Operating Temperature Range -10 → +55 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Maximum Closing Time 20ms
Flow Factor Kv 0.11m³/h
Thread Standard or Connection Type G
Connection Gender Female
Maximum Opening Time 15ms
Series 6014
11 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 136.34
(exc. GST)
$ 156.79
(inc. GST)
units
Per unit
1 - 4
$136.34
5 - 9
$132.26
10 +
$130.87
Related Products
The SMC VX3000 series is a direct acting, ...
Description:
The SMC VX3000 series is a direct acting, 3 port solenoid valve. Suited to various applications such as air, oil, water and steam. Valves are easily replaced without changing existing piping. DIN electrical connection. Class B & Class H coil ...
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° increments. Duty cycle intermittent operation 40% 30 min8W nominal coil power. Power consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A ...
Diaphragm valves for partially aggressive gaseous and liquid ...
Description:
Diaphragm valves for partially aggressive gaseous and liquid media. Suitable for vacuum. For systems with low or fluctuating pressure conditions. Defined flow direction. Valve works without minimum pressure differential. Electromagnetically actuated. With forced lift. Closing damping. Without tool, interchangeable ...
Easy electrical installation by means of a screw ...
Description:
Easy electrical installation by means of a screw terminal coil. Enclosure provided with a 1/2 NPT threaded entry hole (M20 x 1,5 in option) for a broad range of cable entriesA wide range of valves can be supplied with the ...