Burkert Solenoid Valve 143492, 2 port , NO, 230 V ac, 1/4in

  • RS Stock No. 337-5565
  • Mfr. Part No. 143492
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Type 0211 - Direct-acting 2/2 way plunger valve

The 0211 Burkert Solenoid Valve is a 2-way solenoid valve which is direct acting and normally has a closed (Circuit function A) or normally open (Circuit function B).

Features and Benefits

• Vibration-resistant block-screwed coil design.
• Compact design, up to DN 6.
• Housing made of brass and stainless steel with threaded connection.
• Arrow on valve body indicates flow direction.

Where is a Burkert Solenoid Valve used?

This Solenoid Valve is usually used for sealing ports.

How can I mount a Solenoid Valve?

Mounting is accomplished by means of four M4 x 8 mm tapped holes located on the valve underside.

Note

For this product to be considered UL-listed and CSA approved for General Purpose and FM approved for Hazardous Locations Division 2, it must be in conjunction with the type 2509 cable plug connector (Electrically Operated Valves Parts, YSYI2). The connector and gasket must be assembled to the valve with the screw provided after the connection of the wire leads. This valve and connector assembly is delivered together and is to be used as
one unit.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Connection 1/4 in G Female
Connection Size 1/4in
Default Valve Position NO
Suitable Applications Compressed Air, Gas, Hydraulic Oil, Neutral Liquid
Type 2/2
Orifice Diameter 2.5mm
Body Material Brass
Maximum Working Pressure 8 bar
Operating Temperature Range -10 → +55 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55
Flow Factor Kv 0.16
Connection Gender Female
Thread Standard or Connection Type G
Series 0211
8 Within 5 working day(s) (Global stock)
15 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 122.52
(exc. GST)
$ 140.90
(inc. GST)
units
Per unit
1 - 4
$122.52
5 - 9
$119.45
10 +
$116.31
Related Products
The SMC VX3000 series is a direct acting, ...
Description:
The SMC VX3000 series is a direct acting, 3 port solenoid valve. Suited to various applications such as air, oil, water and steam. Valves are easily replaced without changing existing piping. DIN electrical connectionClass B & Class H coil availableCompact ...
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° incrementsDuty cycle intermittent operation 40% 30 min8W nominal coil powerPower consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A 8W d.c.Zero ...
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° incrementsDuty cycle intermittent operation 40% 30 min8W nominal coil powerPower consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A 8W d.c.Zero ...
Two-way, direct operated, EN161 approved solenoid valves for ...
Description:
Two-way, direct operated, EN161 approved solenoid valves for use on gas pilot and gas burner control, zero bar minimum operating pressure, normally closed, threaded port connection. Pressure not required for operationCompact & lightweightISO 4400 DIN connectionClass A, group 2 service ...