Asco Solenoid Valve SCG238A050-24V 50HZ, 2 port , NC, 24 V ac, 1in

  • RS Stock No. 370-0258
  • Mfr. Part No. SCG238A050-24V 50HZ
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

238 series 2/2 power-assisted solenoid valves

Two way solenoid valves for controlling hot and cold water.
No minimum operating pressure (floating diaphragm).
Solenoid valves designed to eliminate water hammer when water is turned off.
Self-cleaning device integrated into the diaphragm aperture for optimum performance.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 24 V ac
Number of Ports 2
Operation Pilot
Connection 1 in G Female
Connection Size 1in
Default Valve Position NC
Suitable Applications Water
Type 2/2
Orifice Diameter 25mm
Body Material Brass
Maximum Working Pressure 10 bar
Operating Temperature Range -20 → +85 °C
Minimum Operating Temperature -20°C
Maximum Operating Temperature +85°C
Flow Factor Kv 10m³/h
Connection Gender Female
Thread Standard or Connection Type G
Series 238
8 Within 5 working day(s) (Global stock)
9 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 417.12
(exc. GST)
$ 479.69
(inc. GST)
units
Per unit
1 +
$417.12
Related Products
Two-way, pilot operated solenoid valves for hot water/steam ...
Description:
Two-way, pilot operated solenoid valves for hot water/steam applications, normally closed with threaded port connection. Brass body. Compact design to minimize heat radiation lossDIN plug connection Ranging from -20 to +184°CCan be mounted in any position.
Two-way, direct operated coaxial valves for high flow/high ...
Description:
Two-way, direct operated coaxial valves for high flow/high pressure fluids, zero bar minimum operating pressure, normally closed with threaded port connection. Brass body. Pressure not required for operation Compatible with viscous or abrasive gases and liquids. Maximum viscosity 500c. St ...
Diaphragm valves for partially aggressive gaseous and liquid ...
Description:
Diaphragm valves for partially aggressive gaseous and liquid media. Suitable for vacuum. For systems with low or fluctuating pressure conditions. Defined flow direction. Valve works without minimum pressure differential. Electromagnetically actuated. With forced lift. Closing damping. Without tool, interchangeable ...
Parker 2-way solenoid valves are used in a ...
Description:
Parker 2-way solenoid valves are used in a wide variety of applications with or without pressure differential. Ideally suited for air, liquids and gases, these valves are available with a brass or stainless steel body. Compressors. Water dispensing & purification. ...