Burkert Solenoid Valve 142228, 2 port , NC, 24 V dc, 3/8in

  • RS Stock No. 388-5034
  • Mfr. Part No. 142228
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

6228 Series 2//2-way Plastic Solenoid Valve

Servo-assisted 2//2-way normally closed solenoid valve
For general purpose applications - including water and sewage treatment, distribution and irrigation systems, dosing, filling and batching
Compact and lightweight
Low power consumption
0.5 to 10 bar pressure range
Servo diaphragm seal: FPM Body in PPE/PA
Unique pipe connection system allows ease of replacement for maintenance applications
Neutral fluids with a maximum temperature of 50°C that will not affect the plastic material e.g. pressurized air, water, hydraulic oils, oils or fat without additives
Ambient temperature 55°C max.


2 pipe connectors required per valve


Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Attribute Value
Supply Voltage 24 V dc
Number of Ports 2
Operation Pilot
Connection 3/8 in G Female
Connection Size 3/8in
Default Valve Position NC
Suitable Applications Neutral Media
Type 2/2
Orifice Diameter 10mm
Body Material Polyamide
Maximum Working Pressure 10 bar
Operating Temperature Range 0 → +50 °C
Minimum Operating Temperature 0°C
Maximum Operating Temperature +50°C
Servo Assist Yes
Maximum Opening Time 30ms
Series 6228
Connection Gender Female
Thread Standard or Connection Type G
Maximum Closing Time 150ms
Flow Factor Kv 1.8m³/h
On back order for despatch 15/10/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 157.28
(exc. GST)
$ 180.87
(inc. GST)
Per unit
1 - 5
6 - 11
12 +
Related Products
Diaphragm valves for partially aggressive gaseous and liquid ...
Diaphragm valves for partially aggressive gaseous and liquid media. Suitable for vacuum. For systems with low or fluctuating pressure conditions. Defined flow direction. Valve works without minimum pressure differential. Electromagnetically actuated. With forced lift. Closing damping. Without tool, interchangeable ...
Parker 2-way solenoid valves are used in a ...
Parker 2-way solenoid valves are used in a wide variety of applications with or without pressure differential. Ideally suited for air, liquids and gases, these valves are available with a brass or stainless steel body. Compressors. Water dispensing & purification. ...
Burkert proportional solenoid valves provide continuously adjustable and ...
Burkert proportional solenoid valves provide continuously adjustable and smooth control over the flow of fluid passing through them. Unlike conventional solenoid and process valves which offer only On or off control, Burkert 2875series process valves use PWM (pulse width modulation) ...
The Burkert 221 series 3/8inG female solenoid valve ...
The Burkert 221 series 3/8inG female solenoid valve has a supply voltage of 24VDC. This 2-port NC position valve has soft mechanical coupling between the main piston and pilot armature aids smooth operation and a precision-engineered main body path helps ...