Burkert Solenoid Valve 153118, 3 port , 24 V dc

  • RS Stock No. 388-5292
  • Mfr. Part No. 153118
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

2 / 2 or 3 / 2-way mini solenoid valve

2 / 2 or 3 / 2 way (any connection) model
With separating membrane. Medium only comes into contact with housing and membrane
With manual actuation
Very low clearance volume, easy to flush and empty
Extremely low power consumption
Suitable for material-compatible media such as water, compressed air, aqueous solutions
Ideal for use as a replenishment, metering, mixing and distribution valve for small quantities (very short switching times)
For analysis, medical and laboratory equipment
Suitable for vacuum applications

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 24 V dc
Number of Ports 3
Suitable Applications Aqueous Solution, Compressed Air, Water
Type 3/2
Orifice Diameter 0.6mm
Body Material PPS
Maximum Working Pressure 3 bar
Operating Temperature Range 0 → +55 °C
Minimum Operating Temperature 0°C
Maximum Operating Temperature +55°C
Flow Factor Kv 0.005m³/h
On back order for despatch 11/12/2019, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 141.00
(exc. GST)
$ 162.15
(inc. GST)
units
Per unit
1 - 4
$141.00
5 - 9
$138.30
10 +
$136.64
Related Products
Solenoid valves with pivoted armatures which provide high ...
Description:
Solenoid valves with pivoted armatures which provide high pressure operation with aggressive gases and fluids. BSP parallel ports compatible with RS stainless compression fittingsIP65 rated 3-pin DIN connector can be positioned through 360° in 90° increments. Zero head pressure capability. ...
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° increments. Duty cycle intermittent operation 40% 30 min8W nominal coil power. Power consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A ...
Manifold type mounting valve. Medium is only in ...
Description:
Manifold type mounting valve. Medium is only in contact with the valve internals and body. High quality seal material FPM (Viton) standard. Coil can be changed easily with valve in place. Coil can be locked in 4 x 90° positions ...
Range of solenoid valves 3 // 2 NF ...
Description:
Range of solenoid valves 3 // 2 NF DL output, with exhaust when off, for neutral liquids up to +100 °C.Mounting on simple or multi-track bases.Able to change the solenoid without removing the valve.High quality FPM (Viton) sealing material as ...